User Manual

7OVEN ACCESSORIES
INSTALLING YOUR OVEN ACCESSORIES
Installing your oven accessories
Side racks
The side racks that come with your oven can be
attached to either side of your oven.
• Insert the rear peg(s) side into the rear access holes
provided, ensuring that the pegs are fully inserted.
• Then locate the front peg into the front access hole
and push in firmly.
• When locating the side racks into the small oven or
grill, ensure the left pegs go into the upper two holes.
Shelves and trays
TIPS & INFORMATION
IMPORTANT
The shelves are designed so that they have maximum
travel but cannot be accidentally pulled right out. The
trays are designed the same way and fit straight into the
side racks.
• Locate the rear edge of the shelf/tray in between
2 guide rails of the side rack - see diagram. Ensure
the same rail positions on both sides of the oven are
being engaged.
• With the front edge raised, begin to slide the shelf
into the oven.
• Once the detents have passed the front edge of the
side rack, the shelf can be pushed completely in.
• The grill/baking tray for separate grill wall oven
models slides into the wire runners in a similar
manner.
• When fully inserted the shelf/tray should not interfere
with the closed oven door.
• Remove extra trays and dishes before roasting or
baking.
• To insert the grill tray in a separate grill underbench
product, open the grill door and fully extend the grill
drawer. Position the grill tray so that the slots on the
outer edges fit over the tabs on the slides.
WVG665