User Manual

25USING YOUR OVEN
1. Ensure the oven is in the off state. Toggle and hold
the selector to until a beep sounds. The ‘DEMO’
text will begin to flash.
2. Toggle the temperature selector to set the first digit
of display to 2. Touch clock to set.
3. Repeat step 2 until display shows 24:68. 3 beeps
sound and DEMO will be shown.
4. To disable DEMO mode repeat steps 1-3.
Pyrolytic cleaning of the oven cavity
The oven has the Pyrolytic self-cleaning function. It
cleans by burning off the spatters and accumulated dirt
and grease from the oven liner, at high temperature. This
process produces ash which can then be wiped out of the
oven cavity.
Pyrolytic cleaning will not remove salt and mineral
residue left in the cavity well when water evaporates.
It is recommended that the residue is cleaned prior
to conducting pyrolytic cleaning cycles. See section
‘Cleaning the cavity well’.
WARNING
During the pyrolytic cleaning process the oven becomes
extremely hot.
• Please keep small children at a safe distance.
• Never clean non-stick baking trays and tins in the
oven during the pyrolytic cycle. High temperatures
damage the non-stick coating and poisonous gas
is released.
• To prevent damage, do not use acids, sprays or
similar cleaning agents.
CAUTION
• During pyrolytic cleaning the air outlet exhaust
above the door must be kept clear of any
obstruction (e.g. bulky tea towels).
• Do not use the oven to clean miscellaneous items
(e.g. cookware).
Pyrolytic cleaning (WVEP618 model only)
Before carrying out the Pyrolytic function
1. Turn off the oven and wait until it is cold.
2. Remove all accessories
3. Clean the oven floor and the inner door glass with
warm water, a soft cloth and a mild detergent.
Do not fill the water tank during cleaning. It restarts
the cleaning cycle.
Pyrolytic Cleaning Operation
1. Turn on the oven.
2. Select: Menu / Cleaning / Cleaning. Press
3. Put the baking tray on the cavity base underneath
the drain pipe to collect water from the water
tank. Press to start the water tank emptying.
4. When the tank emptying ends, remove the baking
tray. Wipe the oven cavity and the inner door
glass with a soft cloth. Press
.
5. Press
or to select the cleaning mode. Press .
Option Cleaning mode duration
Quick Light cleaning 1 hr 30 min
Normal Normal cleaning 2 hrs
Intense Thorough cleaning 2 hrs 30 min
TIPS & INFORMATION
When the cleaning starts, the oven door is locked
and the lamp is off. To stop the cleaning before it is
completed, turn off the oven. The oven stays locked
until it is cold.
Pyrolytic cleaning (all other models)
Before carrying out the Pyrolytic function
1. All accessories must be removed from the oven,
including shelves, trays and side racks.
2. Clean large deposits, spills or grease from the
oven cavity.
3. Ensure the cavity well is free of limestone scaling
(refer to cleaning the cavity well chapter)
4. Choose the Pyrolytic cleaning cycle from
the following:
Soiling Duration
light clean 1 hr 30 mins
normal clean 2 hr 30 mins
NOTE: Duration includes heat-up time, excluding
cool-down time.
Light clean
This is an energy saving cycle that can be used on a
regular basis if the oven is lightly soiled. Possibly after
every 2nd or 3rd roast.
Normal clean
Use this as the regular cycle about once every
2-3 months.
Pyrolytic Cleaning Operation
The pyrolytic cleaning function can be selected by turning
the function selector switch clockwise to the pyrolytic
position. Use
or to toggle between a pyrolytic
cleaning time of 1:30 hours or 2:30 hours. The pyrolytic
function can be stopped at any time by turning the
function selector counterclockwise to the OFF position.