User Manual

24 USING YOUR OVEN
4. Touch the button as often as necessary, until the
‘end time’
symbol appears flashing.
5. Set the desired switch-off time using
or whilst
the ‘end time’
symbol is flashing.
6. 5 seconds after the last change the ‘cook time’ and
‘end time’ arrows are lit to confirm that the oven has
been programmed.
7. When the delayed start cooking time has elapsed, a
signal will sound and the appliance will turn off. To
stop the signal, press any button on the clock and
then turn the oven function selector to OFF.
NOTE: Delayed start cooking time cannot be set for the
Rapid Heat function.
The feature can be cancelled at any time by returning the
function selector to OFF.
ADDITIONAL FUNCTIONALITY
Setting the countdown timer
Use this for timing any activity. For example boiling eggs.
1. Touch the
button, the display will flash.
2. Set the countdown time you want by using
and
. Commence with setting the number of seconds
first. The minutes and hours can then be set by
subsequently pressing the
button again and
adjusting using
or . 5 seconds after the last
change the timer will stop flashing, confirming the
timer has been set.
3. To cancel the timer touch the
button, the display
will flash. Then touch and hold
and buttons
until the timer is cleared.
4. To stop the beeper, touch any button.
NOTE: The clock display cannot be selected when the
timer is operating.
Elapsed Time
When an oven function is selected (other than pyrolytic
clean) an elapsed timer commences on the display.
To reset this timer touch and hold both the
and
buttons until the timer is reset.
Displaying the oven temperature
During operation of the oven the current oven
temperature during pre-heating of the oven can be
displayed by touching the button. During normal
operation the set temperature can be reviewed by
touching the
button.
NOTE: this temperature will only be displayed for
approximately 5 seconds.
Light operation
During operation of the oven the light can be switched
off by touching and holding the
button until the
light turns off. Also the light can be turned on from the
standby state by touching and holding the
button
until the light comes on.
Activating the child-proof lock
When the child lock is engaged, the oven cannot be
operated and the door cannot be opened.
1. Switch off the appliance using the function
selector switch.
2. Touch and hold the
and buttons at the same
time until the word ‘SAFE’ is displayed and a double
beep is sounded. The word SAFE will be replaced by
a padlock symbol on the display after 5 seconds.
Releasing the child-proof lock
Touch and hold the and buttons at the same
time until a double beep is sounded. This will commence
to unlock the door and after 5 seconds the oven is ready
for use.
Activating the function lock
The active function can be locked so it is not changed
unintentionally.
1. The active function can be locked, to activate touch
and together until ‘Loc’ is displayed.
2. If the oven is switched off while in ‘Loc’ it will switch
into Child lock mode and the display will show ‘SAFE’.
3. Oven can be released the same way as ‘Releasing the
child proof lock’
Safety Cut-out feature
The oven automatically switches itself off if the
temperature is not adjusted or the appliance is left
operating after a period of time. The oven switches itself
off after:
• 12.5 hours when the temperature is set less than
120°C.
• 8.5 hours when the temperature is set to 120°C
or above, and below 200°C.
• 5.5 hours when the temperature is set to 200°C or
above, and below 250°C.
• 3.0 hours when the temperature is set at 250°C.
DEMO Mode
The oven can be set to operate in a demo mode (e.g. in a
retail store). In this mode the display works and functions
can be set but the oven does not actually heat. When
in this mode the text ‘DEMO’ will be lit. The following
instructions show how to enter and exit ‘Demo’ mode.
USING YOUR OVEN (CONTINUED)