User Manual

18 19USING YOUR OVEN USING YOUR OVEN
Displaying the oven centre and set temperature (other
than pyrolytic clean function)
1. Press the
button when the oven is operating
and the “Oven centre temperature” is displayed.
2. Press the
button again within 5 seconds and
the “Oven set temperature” is displayed.
3. Alternatively, the
selector can be toggled
left (
) or right ( ) for 1 second and the “Oven set
temperature” is displayed.
NOTE: This temperature is displayed for 5 seconds.
Light operation (WVEP615 only)
1. At any time, the oven lamp can be switched on or off
by pressing and holding the
button for 5 seconds.
Activating the child-proof lock
When the child lock is engaged, the oven cannot be
operated and the door cannot be opened.
1. Switch the
selector to “Off”.
2. Press and hold the
and buttons at the same
time until the word ‘SAFE’ is displayed and a double
beep sounds. The word safe will be replaced by a
padlock symbol on the display after 5 seconds.
De-activating the child-proof lock
1. Press and hold the and buttons at the same
time until a double beep sounds. This will commence
to unlock the door and after 5 seconds the oven is
ready for use.
Switching the clock display ON and OFF
When the oven is off, the clock display can be switched
on and off.
1. Press together
and symbols for 2 seconds to
switch off the display.
2. Press together
and symbols for 2 seconds to
switch the clock display on again.
When the oven is off and the display is set to the ‘off’
state, pressing the
or buttons will display the time of
day for 5 seconds then turn off the display.
NOTE: If a timer mode is set or the oven is operating, then
it is not possible to switch the display off.
Safety cut-out feature
The oven will automatically switch “Off” if the
temperature is not adjusted or the appliance is left
operating for a period of time. The oven switches itself
off after:
1. 12.5 hours when the temperature is set between 30°C
and 120°C.
2. 8.5 hours when the temperature is set between 120°C
and 200°C.
3. 5.5 hours when the temperature is set between
200°C and 250°C.
4. 3.0 hours when the temperature is set at 250°C.
Changing the time of day
1. Switch the appliance “Off” by pressing “On / Off”.
2. Press
button repeatedly until the “Set clock”
symbol
appears flashing with the “Timer arrow”
symbol
on the display.
3. To set the time of day, press
or symbols while
the “Set clock” symbol
is flashing.
4. After 5 seconds from the last change, the “Set clock”
symbol
and “Timer arrow” symbol will disappear,
confirming the time has been set.
Setting the oven function
1. Switch the appliance “On” by pressing “On / Off”. The
oven light will turn on.
2. Press
button repeatedly until the desired
oven function appears. The suggested cooking
temperature for that function will appear in the
display which can be changed as described below.
After 5 seconds from the last change, the oven will
begin to heat.
NOTE: If the oven temperature is less than the set
temperature, the oven temperature and a rising
thermometer icon is displayed. When the oven
temperature reaches the set temperature, 4 beeps sound
and the set temperature and full thermometer icon are
displayed. If the set temperature is less than the oven
temperature, the set temperature and a full thermometer
icon is displayed.
Changing the oven temperature
1. Press or symbols to decrease or increase
the temperature setting. The temperature setting
changes in increments of 5°C.
NOTE: The temperature can be adjusted at any time. Oven
temperature cannot be changed for the Defrost function.
For model WVEP 618, oven temperature cannot be
changed for the Pyro function.
Setting the cooking duration
1. Select the desired oven function and cooking
temperature.
2. Press
button repeatedly until the
symbol appears flashing with the “Timer arrow”
symbol
on the display.
3. Set the desired cooking duration by pressing
or
symbols while the “Timer arrow” symbol
is flashing.
4. After 5 seconds from the last change, the “Timer
arrow” symbol
will disappear confirming the
cooking duration is set.
5. A countdown of the “Cooking time remaining” will be
shown onthe display.
6. When the set time has elapsed, signal will sound and
the oven will turn off. To stop the signal, press any
button on the clock and then turn the oven
selector to “Off”
NOTE: Do not forget to add pre-heating time if necessary.
DEMO mode
The oven can be set to operate in a demo (e.g. in a retail
store) mode. In this mode the oven does not actually heat
if the oven has been inadvertently supplied in this mode.
The following instructions demonstrate how to exit
this mode.
1. Ensure the oven is “Off”. Press and hold the
button
until a beep sounds. The ‘Demo’ text on the display
will flash.
2. While holding the
button, turn the selector
to the first oven function until another beep is heard.
3. Then turn the
selector to the ‘Off’ position.
4. Release the
button.
5. Toggle and hold the
selector to the right (
) until 3 beeps sound. The ‘Demo’ text will no longer
be displayed and the oven will function normally. If
the ‘Demo’ text is still displayed repeat the above
procedure.
Operating the Programmable Controller
(WVE607, WVE617 & WVEP618)
General features
The oven is equipped with a programmable controller
that can be used to turn the oven on and off
automatically. The function automatically turns
the oven off after a set amount of time. The ‘End time’
function is used to set the time of day you want the
cooking cycle to finish. A “Delayed start” is possible by
combining the and features to switch
the oven on and off at a specific time during
the day.
Setting the time of day (after electrical connection):
1. After the appliance has been electrically connected,
the “Set clock” symbol
will flash on the display.
2. To set the time of day, press
or symbols while
the “Set clock” symbol
is flashing.
3. After 5 seconds from the last change, the “Timer
arrow” symbol
will disappear confirming the time
has been set.
NOTE: The clock has a 24-hour display.
Setting the cooking end time
1. Select the desired oven function and cooking
temperature.
2. Press
button repeatedly until the
symbol
appears flashing with the “Timer arrow”
symbol
on the display.
3. Set the desired time of day to finish cooking by
pressing
or symbols while the “Timer arrow”
symbol
remains flashing.
4. After 5 seconds from the last change, the “Timer
arrow” symbol
will disappear confirming the
cooking end time is set.
5. A countdown of the “Cooking time remaining” will be
shown on the display.
6. When the set time has elapsed, signal will sound and
the oven will turn off. To stop the signal, press any
button on the clock and then turn the oven
selector to “Off”
Setting the delayed start cooking time
1. Program the “Cooking duration” and “Cooking
end time”
as described in the relevant sections.
Once both “Cooking duration” and “Cooking end
time”
has been set, the cooking end time symbol
will stop flashing. Cooking duration and oven set
temperature will be displayed.
NOTE: Do not forget to add pre-heating time if necessary.
To check or cancel settings
1. To check your settings, press until the setting
you want to check is displayed.
2. To cancel “cooking end time” press
until
symbol appears flashing with the “Timer
arrow” symbol
. Press and hold symbol until
the clock no longer reverses you will hear a beep. If
the oven is set, the oven will start once the
“Timer arrow” symbol
stops flashing.
3. To cancel “cooking duration” press
until
symbol appears flashing with the “Timer
arrow” symbol
. Press and hold symbol until the
clock no longer reverses you will hear a beep. This
automatically cancels “delayed start” and if the oven
“Function” is set, the oven will start once the “Timer
arrow” symbol
stops flashing. Because you have
cancelled “auto shut off” the oven will continue to
heat until you manually turn it off.
On completion of cooking
When the set time has elapsed, the oven will turn off and
a beeper will sound. The remaining time indication “0:00”
will appear on the display.
1. Press
or symbols to stop the clock from
beeping.
USING YOUR OVEN (CONTINUED)