User Manual
24 USING YOUR OVEN
4.   Touch  the   button as often as necessary, until the 
‘end time’ 
 symbol appears flashing.
5.   Set the desired switch-off time using 
 or   whilst 
the ‘end time’ 
 symbol is flashing. 
6.   5 seconds after the last change the ‘cook time’ and 
‘end time’ arrows are lit to confirm that the oven has 
been programmed.
7.   When the delayed start cooking time has elapsed, a 
signal will sound and the appliance will turn off. To 
stop the signal, press any button on the clock and 
then turn the oven function selector to OFF.
NOTE: Delayed start cooking time cannot be set for the 
Rapid Heat function. 
The feature can be cancelled at any time by returning the 
function selector to OFF.
Additional Functionality
Setting the countdown timer
Use this for timing any activity. For example boiling eggs.
1.   Touch  the 
 button, the display will flash.
2.   Set the countdown time you want by using 
 and 
. Commence with setting the number of seconds 
first. The minutes and hours can then be set by 
subsequently pressing the 
 button again and 
adjusting using   or  . 5 seconds after the last 
change the timer will stop flashing, confirming the 
timer has been set.
3.   To cancel the timer touch the 
 button, the display 
will flash. Then touch and hold 
 and   buttons 
until the timer is cleared.
4.   To stop the beeper, touch any button.
NOTE: The clock display cannot be selected when the 
timer is operating.
Elapsed Time
When an oven function is selected (other than pyrolytic 
clean) an elapsed timer commences on the display.
To reset this timer touch and hold both the 
 and   
buttons until the timer is reset.
Displaying the oven temperature
During operation of the oven the current oven 
temperature during pre-heating of the oven can be 
displayed by touching the   button. During normal 
operation the set temperature can be reviewed by 
touching the   button.
NOTE: this temperature will only be displayed for 
approximately 5 seconds.
Light operation
During operation of the oven the light can be switched 
off by touching and holding the 
 button until the 
light turns off. Also the light can be turned on from the 
standby state by touching and holding the 
 button 
until the light comes on.
Activating the child-proof lock
When the child lock is engaged, the oven cannot be 
operated and the door cannot be opened.
1.   Switch off the appliance using the function 
selector switch.
2.   Touch and hold the 
 and   buttons at the same 
time until the word ‘SAFE’ is displayed and a double 
beep is sounded. The word SAFE will be replaced by 
a padlock symbol on the display after 5 seconds.
Releasing the child-proof lock
Touch and hold the   and   buttons at the same 
time until a double beep is sounded. This will commence 
to unlock the door and after 5 seconds the oven is ready 
for use.
Activating the function lock
The active function can be locked so it is not changed 
unintentionally.
1.   The active function can be locked, to activate touch 
 and   together until ‘Loc’ is displayed. 
2.   If the oven is switched off while in ‘Loc’ it will switch 
into Child lock mode and the display will show ‘SAFE’.
3.   Oven can be released the same way as ‘Releasing the 
child proof lock’
Safety Cut-out feature
The oven automatically switches itself off if the 
temperature is not adjusted or the appliance is left 
operating after a period of time. The oven switches itself 
off after:
•   12.5 hours when the temperature is set less than 
120°C.
•   8.5 hours when the temperature is set to 120°C 
or above, and below 200°C.
•   5.5 hours when the temperature is set to 200°C or 
above, and below 250°C.
•   3.0 hours when the temperature is set at 250°C.
DEMO Mode
The oven can be set to operate in a demo mode (e.g. in a 
retail store). In this mode the display works and functions 
can be set but the oven does not actually heat. When 
in this mode the text ‘DEMO’ will be lit. The following 
instructions show how to enter and exit ‘Demo’ mode.
1.   Ensure the oven is in the off state. Toggle and hold 
the selector to 
 until a beep sounds. The ‘DEMO’ 
text will begin to flash.
2.   Toggle the temperature selector to set the first digit 
of display to 2. Touch clock to set.
USING YOUR OVEN (CONTINUED)










