User Manual

17USING YOUR OVEN
5. After 5 seconds from last change, the symbol
will stop flashing confirming the cooking end time
is set.
6. The “Cooking end time” will be shown on the display.
7. When the set time has elapsed, a signal will sound
and the oven will turn off. To stop the signal, press
any button on the clock and then turn the oven
selector to “Off”.
NOTE: Cooking end time cannot be set for the Rapid Heat
function. The cooking duration can be cancelled at any
time by turning the “Function” selector to “Off”.
Setting the delayed start cooking time
1. Program the and as described in
the relevant sections. Once both the
and
have been set, the and
indicators will stop flashing and the “Set temperature”
will be displayed.
NOTE: Do not forget to add pre-heating time if necessary.
Delayed start cooking time cannot be set for the Rapid
Heat function. The delayed start cooking time can be
cancelled at any time by turning the “Function” selector
to “Off”.
Setting the minute minder
1. Press the button and the “Minute minder” symbol
begins to flash.
2. Set the countdown time “Seconds” by using
and
buttons while the minute minder symbol
is flashing.
3. Press the
button and the countdown time
“Minutes” will flash and can be set in the same
manner.
4. Press the
button and set the countdown time
“Hours” will flash and can be set in the same manner.
5. After 5 seconds from the last change, the “Minute
minder” symbol
will stop flashing confirming it has
been set.
6. Once the set time has elapsed, a signal will sound for
1 minute. The time indication “0.00” and a flashing
“Minute minder” symbol
will appear on the display.
7. To stop the signal, press any button on the clock.
8. To cancel the minute minder, press the
button and
the display will flash. Then press and hold and
buttons together until the minute minder
is cleared.
NOTE: This feature has no effect on the oven operation.
With the oven “Off’ and minute minder operating, the time
of day cannot be displayed.
Elapsed time
When an oven function is selected (other than pyrolytic
clean), after 5 seconds the “Elapsed time” is displayed.
1. To reset the “Elapsed time”, press and hold both the
and buttons until the timer is reset.
Setting the oven function
1. Turn the oven selector clockwise to select
the desired oven function. The default temperature
for that function will be shown on the display.
2. After 5 seconds from the last change, the oven will
begin heating and the “Elapsed time” commences on
the display.
Changing the oven temperature
1. Toggle the selector left ( ) or right ( ) as
required to set the desired cooking temperature. The
temperature setting changes in increments
of 5°C.
2. The set temperature is displayed for 5 seconds from
the last change.
NOTE: The temperature can be adjusted at any time.
Oven temperature cannot be changed for the Defrost or
Pyro function.
Setting the cooking duration
1. Select the desired oven function and cooking
temperature.
2. Press “Clock” button until the
symbol
appears flashing.
3. Set the desired cooking duration “Minutes” by using
or buttons while the symbol
is flashing.
4. Press the
button and the cooking duration
“Hours” will flash and can be set in the same manner.
5. After 5 seconds from the last change, the
symbol will stop flashing confirming the cooking
duration is set.
6. A countdown of the “Cooking time remaining” will be
shown on the display.
7. When the set time has elapsed, a signal will sound
and the oven will turn off. To stop the signal, press
any button on the clock and then turn the oven
selector to “Off”.
NOTE: Do not forget to add pre-heating time if necessary.
Cooking duration cannot be set for the Rapid Heat
function. The cooking duration can be cancelled at any
time by turning the “Function” selector to “Off”.
Setting the cooking end time
1. Select the desired oven function and cooking
temperature.
2. Press
button until the symbol
appears flashing.
3. Set the desired time of day “Hours” to finish cooking
by pressing
or buttons while the symbol
is flashing.
4. Press the
button and the time of day “Minutes”
to finish cooking will flash and can be set in the same
manner.