User Manual

17USING YOUR OVEN
USING YOUR OVEN (continued)
Operating the touch control clock model
WVE915SC
Select the cooking function
Turn the function selector in any direction to the desired
cooking function. The oven cavity light will come on.
Select the temperature
To set the temperature, turn the temperature selector in
a clockwise direction to the desired setting. An indicator
light in the display will come on.
A thermostat controls the temperature in your oven.
When the temperature is reached, the heating source
switches itself off and the indicator light goes out. When
the oven temperature falls below the desired setting, the
heating source switches on and the indicator light comes
on again.
Once the food is cooked, turn the temperature selector
back in an anti-clockwise direction. Do not force it
right round in a clockwise direction as this will result in
damage to the thermostat.
NOTE: The desired cooking function must be selected
before the oven will operate.
Cooking with timer
1
1
1
2
1
4
1
3
1
5
1
6
1
7
1. On when timer is set
2. Time of day icon
3. Cook time icon
4. End time icon
5. Minus
6. Touch to toggle through timer modes
7. Plus
Setting the time of day
Before the appliance can be used, the time must be set.
After the appliance has been electrically connected,
‘12:00’ will be displayed and the clock
icon will flash.
To set the time of day in hours and minutes touch
the
or
symbols. Refer to the diagram above.
5 seconds after the last change, the clock
icon will
disappear, confirming the time has been set. Once the time
has been entered, the clock advances minute by minute.
NOTE: The clock has a 24 hour display.
Change the time of day (Daylight saving)
1. Press until the clock icon begins flashing.
2. Press
or
to change the time. 5 seconds after
the last change, the clock
icon will disappear,
confirming the time has been set.
Setting the timer
1. Touch the symbol until the timer icon
begins flashing.
2. Set the countdown time you want by using
and
. 5 seconds after the last change the timer icon
will stop flashing and the countdown will start in
minutes.
3. To stop the beeper, touch any symbol.
4. Maximum countdown time is 2hrs 30mins.