Quick Start Guide

Condition the oven
(to burn o any residue)
New appliances can have oil or residue left from
manufacturing. You will need to heat your oven
for 30 minutes before using it for the first time.
1. Turn the function selector dial
to FAN FORCED
2. Using the temperature selector, set the oven at
180°C for approximately 30 minutes.
3. Later run grill on maximum for 15 minutes with
GRILL DOOR OPEN. Please ensure that the room
is well ventilated during this process.
Installing the oven accessories
1. Insert side racks
There is a left hand and right hand
version (see image for details).
1. Insert the rear peg into the rear
access hole provided,ensuring that
the peg is fully inserted.
2. Then locate the front peg into
the front access hole and push
in firmly.
Set...
2. To fit a shelf or tray to side racks:
1. Locate the rear edge of the
shelf/tray in between 2 guide
rails of the side rack - see
diagram.
2. Align the shelf to the same rail
positions on both sides, with
the front edge raised, begin to
slide the shelf into the oven.
3. When fully inserted the shelf/
tray should not interfere with
the closed oven door.
Left hand side rack
front peg
rear peg
Detent
Set the time
You must set the time before you can
operate your appliance.
1. After the appliance has been electrically
connected, ‘12:00’ will be displayed and
the clock icon will flash
2. Press + or - symbols to set the time
of day
3. 5 seconds after the last change, the
clock icon will disappear, confirming the
time has been adjusted.
NOTE: The clock has a 24-hour display.