Instruction Manual

10
EN
CLEANING AND CARE
WARNING: Make sure you have turned the appliance off and
unplugged it from the power supply.
• For the 18” metal fan, you can either
a) Use a vacuum cleaner or a can of compressed air to clean
the appliance without dissembling it, and then use a dry
cloth to wipe it dry; or
b) Clean it by removing the front fan cover (5):
- Remove the 8 screws on the front fan cover (5) with a
magnetic-tipped screwdriver.
- Remove the front fan cover (5) by rotating it
counterclockwise to loosen the screws. The fan blade (4)
and rear fan cover (6) cannot be removed.
- After cleaning, replace the front fan cover (5) by rotating
it clockwise, and then tighten the screws.
- Wipe the fan blade (4) and the exterior with a damp
cloth and mild detergent solution. Allow them to dry
completely before using the appliance again.
• For the 4” USB fan:
a) Vacuum the fan without dissembling the personal fan grille
(15).
Note:
• Clean the fan on a regular basis.
• Never clean the fan with abrasive or volatile cleaners such as
alcohol, thinners and polishing powder.
• Do not allow water or any other liquids to get into the motor
housing.
WCFNCP001BK_18 HV Fan with Bonus Desk Fan_2L.indd 10 5/12/2019 18:00:07