User manual

CARE AND CLEANING
Warning! Before maintenance,
deactivate the appliance and
disconnect the mains plug from the
mains socket.
Dirty filters and clogged spray arms de-
crease the washing results.
Make a check regularly and, if neces-
sary, clean them.
CLEANING THE FILTERS
A
B
C
C
1. Turn the filter (A) counterclockwise and
remove it.
A1
A2
2. To disassemble the filter (A), pull apart
(A1) and (A2).
3. Remove the filter (B).
4. Wash the filters with water.
5. Before you put the filter (B) back, make
sure that there are no residues of food
or soil in or around the edge of the
sump.
6. Make sure that the filter (B) is correctly
positioned under the 2 guides (C).
7. Assemble the filter (A) and put it back
in filter (B). Turn it clockwise until it
locks.
An incorrect position of the filters can
cause bad washing results and dam-
age to the appliance.
CLEANING THE SPRAY ARMS
Do not remove the spray arms.
If the holes in the spray arms are clogged,
remove remaining parts of soil with a thin
pointed object.
EXTERNAL CLEANING
Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads
or solvents.
INTERNAL CLEANING
If you regularly use short duration pro-
grams, these can leave deposits of grease
and limescale inside the appliance.
To prevent this, we recommend to run long
duration programs at least 2 times per
month.
westinghouse 13