User Manual

12 REMOVING FEATURES
USING YOUR REFRIGERATOR
Bottle filling function
The bottle filling function facilitates the flow of water
directly into the mouth of a bottle, minimising splashing
and spillage. Water flows from the water dispensing
nozzle located on the underside of the ice and water
dispenser.
water dispenser
To use this function, place the mouth of the bottle over
the water dispensing nozzle.
Once the mouth of the bottle is completely over the
water dispensing nozzle (see diagram below) gently
push bottle up to dispense water and fill bottle. Once the
bottle is full, remove the bottle and the flow of water will
stop automatically.
Controlling the temperature
The default temperature for the refrigerator is 3°C and
-18°C for the freezer. If you want to change the temperature,
follow the instructions on the following pages.
Make only small adjustments and wait 24 hours to
see if it’s correct. Checking the softness of ice cream
is a good indication of whether your freezer is at the
correct temperature, while feeling the coldness of water
kept in your refrigerator is a good way of checking the
temperature of the food compartment.
NOTE: The set temperature for the refrigerator is an
average temperature for the whole refrigerator cabinet.
Temperatures inside each compartment may vary
depending on how much food you store and where you
place it. High or low temperature may also affect the
actual temperature inside the refrigerator.
Door alarm
Your new appliance is fitted with a door alarm. This alarm
will sound if the refrigerator or freezer door is left open
for longer than 3 minutes, To silence the alarm, check for
any obstructions preventing the door from closing and
remove or simply close the door.