Installation guide

WHIRLPOOL CORPORATION  TRAINING
Changing the Light Bulbs
 98
 NOTE: Not all bulbs will fit your refrigerator. Be sure to replace the bulb with one of the same size,
shape and wattage.
 Replacement bulbs are available from your dealer.
 ■ The dispenser lights are LEDs that cannot be changed.
 ■ On some models, the interior lights are LEDs that cannot be changed.
 ■ On some models, the interior lights require a 40-watt (maximum) bulb.
 1. Unplug refrigerator or disconnect power.
 2. Remove light shield when applicable.
 NOTE: To clean the light shield, wash it with warm water and liquid detergent.
 Rinse and dry the shield well.
 3. Remove light bulb and replace with one of the same size, shape and wattage (40 watts maximum).
 4. Replace light shield when applicable.
 5. Plug in refrigerator or reconnect power.