Installation guide

WHIRLPOOL CORPORATION  TRAINING
Water and Ice Dispensers
 85
On some models!
While in “sleep” mode, the first press of a control button will only reactivate the display screen, without
changing any settings.
After reactivation, changes to any settings can then be made.
If no changes are made within 2 minutes, the display will re-enter “sleep” mode.
The dispensing system will not operate when the freezer door is open.
Allow 24 hours for the refrigerator to cool down and cool water.
Water Temperature will be around 10*C
(If it is any cooler it is considered CHILLED which is not recommended, and if chilled is required then ICE can be added)
Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced.
The display screen on the control panel will automatically dim and enter “sleep” mode when both doors have been closed
and the control buttons and dispenser pad have not been used for 2 minutes or more.
Notes