Installation guide

WHIRLPOOL CORPORATION TRAINING
To Adjust The Set Points
69
NOTE: Each button press advances the temperature setting 1-2° higher.
After reaching the highest possible set point, the next button press reverts the setting to the
lowest possible set point, and then each additional press raises the setting 1-2° higher.
CONDITION:
TEMPERATURE
ADJUSTMENT:
REFRIGERATOR too cold
FRIDGE 1-2° higher (eg. From 3 to 4 or 5)
REFRIGERATOR too warm
FRIDGE 1-2° lower
FREEZER too cold
FREEZER 1-2° higher
FREEZER too warm / Too little ice
FREEZER 1-2° lower
When adjusting temperature set points, use the following chart as a guide
After adjusting the temperature, please
allow at least 24hrs for the settings to
take full effect on the product!