User Manual

Recommended installation sequence
Recirculation mode installation
2
2
2
2
1
1
2
2
C
2
8X
WOOD SCREWS
4*30
WALL PLUG
D
2
* Leave 3mm
gap between
screw head and wall
Diagram C2
• Install cooker hood body. Determine working
height, mark wall to suit. Install flue cover mounting
brackets.
• The highlight screws of hang Hood can’t tighten it
need to keep 3mm between the wall and the screw
to make sure could install outer flue.
Diagram E2
Put the carbon filter on both sides of the fan. Rotate and
frighten the carbon filter.
Diagram(s) F2
Install bottom section of telescopic flue cover
Diagram G2
Install top section of telescopic flue cover
and fasten the cover with supplied screws