User Manual

Components List
1x
(Only for WRC904SD)
2x
8x
8x
INSTALLATION & USER MANUAL
CANOPY RANGEHOOD
WRC902SD
WRC904SD
1x
1x
1x
(Only for WRC904SD)
Intalling the cooker hood
Before installing the cooker hood, peel off any protective plastic
covering.
Warning: Failure to install the screws or fixing device in accordance with these instructions may
result in electrical hazards.
180
200
470（max）
540
1240(max)
230
20
900
500
65 65
105
55 55
495
65 65
245
95
275275
Minimum
600 Electric
620 Gas
Maximum
800mm
Hood Base
Top of trivet
DIMENSIONS ARE IN MILLIMETRES
Note:
Some installation may require
telescopic flue cut to length. Cut
with tin snips or a fine-tooth hack
saw blade, taking care not to
distort or dent flue.
The maximum space between
the wall and screw top is 3mm.
All the holes on the wall are
Φ6mm.
Diagram B:
Recommended working heights.
Flue mounting bracket locations.
Telescopic flue cover fixing
points.
Note:
If the instructions of the hob
specify a greater distance than
the minimum, then that shall
be the minimum height for the
installation