INSTRUCTION GUIDE RANGEHOOD FLUE EXTENSION AR400FW Suits the Westinghouse Canopy Rangehood WRC604
INSTRUCTIONS In order to correctly install your appliance please refer to the user manual supplied with your rangehood for full details or download the user manual by scanning the below QR code. WARNING WARNING Failure to install the screws or fixing device in accordance with these instructions may result in electrical hazards. To install your flue cover extension, please follow steps 1-8 below (as per the user manual).
4. Fit the dampers to the exhaust air outlet. Slight bending of the dampers will be required for the fitment. T-piece mounting bracket Flue cover mounting bracket Fig. 7 5. Hang the body hood on the mounting screws then secure at the anti-tilt locations(2 places) as indicated in Fig 8. Fig.9 T-piece mounting bracket Flue cover mounting bracket Fig.8 epending on the preferred installation/ducting mode, D follow step 6a or 6b below. Fig. 10 6a. Recirculating mode (Fig.
WARNING WARNING Exhaust air must not be discharged into a wall cavity, unless the cavity is designed for the purpose. 9b Discard upper flue cover and replace with new extension piece as per diagram below. Fig. 11 7. Insert the power cord to the power outlet. 10. Install the filters to the hood. Fig. 12 8. Insert the flue cover section to the body hood. Fig. 15 Fig. 13 Installing the Flue Cover Extension (Accessory) 9a.
