Installation Guide

3GENERAL WARNINGS
Please read the user manual carefully and store in a handy
place for later reference. Pass the user manual on to
possible new owners of the appliance.
NOTE: Please refer to your Appliance User Manual for
warnings relating to the appliance.
GENERAL WARNINGS
• Thoroughly inspect cabinets for any signs of damage
before commencing installation.
• If any damage is identified please contact
Electrolux Service.
• Check refrigerator recess dimensions and ensure that
they provide at least the minimum clearance at the back,
side and top as recommended on page 4.
• The floor where the refrigerator is to be placed must
be level, otherwise you will not be able to install your
refrigerator properly.
• Ensure that the floor and surrounding cupboards are
adequately protected from damage during unpacking
and throughout the installation process.
• Ensure that two adequate and accessible powerpoints
are installed inside the refrigerator recess before
installing and connecting your appliances. These
powerpoints should also be readily accessible after
fridge installation is completed.
• Do not use extension leads or power board or double
adapter under any circumstances as it may lead to
electric shock and / or fire. Seek assistance of a licensed
electrician if required.
• Unpack the connection kit and check for completeness
by referring to the “Connection kit package contents”
section.
NOTE: Due to size and weight of the cabinets as well as
complexity of the task ensure that installation is attempted
with at least two able-bodied persons. You are strongly
urged to consider hiring Electrolux Service to do the
installation.
BEFORE YOU BEGIN