Use and Care Manual

English | 11
ASSEMBLY
lThe window vent kit can be modied to t different sized
windows that open vertically or horizontally up to 39.9 in.
If the window opening is less than 20.5 in., use a saw
to cut the xed panel to the appropriate size.
If the window opening is larger than the xed panel
(20.5 in.), use sliding panels. Secure additional pan-
els using screws.
lInstall the window vent kit into the window frame.
A - Foam Seal (Adhessive)
B - Height
A - Hose Outlet
FIG. 10
A
B
A - Fixed Panel
B - Sliding Panel
C - Screw
FIG. 11
FIG. 12
FIG. 15
FIG. 14
C
B
A
HORIZONTAL INSTALLATION
FIG. 13
VERTICAL INSTALLATION
A
lPlace the foam seal (non-adhessive type) between the
glass and the window frame to prevent air and insects
from getting into the room.
lInsert the hose outlet into the opening in the xed panel.
NOTE: When the hose outlet is disconnected, cover the
opening.
A - Foam Seal (Non-adhessive)
A