User manual

16
INSTALLATION
Technical information
WARNING
Always use safety gloves while handling the cooker
• The installation, adjustments, conversions and
maintenance operations listed in this part must
only be carried out by qualifi ed personnel. The
manufacturer cannot be held responsible for any
damage to persons or property resulting from an
incorrect installation of the appliance.
• The safety and automatic adjustment devices of
the appliances may, during its life, only be modifi ed
by the manufacturer or duly authorised supplier.
• In accordance with the gas standard, the all-
gas and combi appliances is “class 2 subclass 1”
(recessed fi g. 14) and, as such, must comply with
the clearances specifi ed in fi gure and consequently
any side walls must be no higher than the work
top.
• The walls adjacent to and surrounding the
appliances must be able to withstand an
temperature of 95°C.
• The installation of all-gas and combi appliances
must comply with the standards in force.
• This appliance is not connected to a fl ue for
discharge of the combustion products; therefore,
it must be connected in compliance with the above
mentioned installation rules. Particular attention
must be paid to the instructions given below for
ventilation and aeration.
Installation
Unpacking your cooker
• Once the wrapping has been removed from
the outer surfaces and the various inner parts,
thoroughly check that the appliance is in perfect
condition.
If you have any doubts do not use the appliance
and call in a qualifi ed person.
• Some parts mounted on the appliance are
protected by a plastic fi lm. This protection must
be removed before using the appliance. We
recommend slitting the plastic fi lm along the edges
with a sharp knife or pin.
• Do not move the appliance by the handle.
The packaging materials used (cardboard, bags,
polystyrene foam, nails etc.) must not be left
anywhere within easy reach of children as they
are a potential hazard source.
100 mm
750 mm
50 mm
Fig. 14