User Manual
12 13
Weight defrost function
1. Press , “dEF1” will display.
2. Press number pads to input weight to be defrosted.
Input the weight range between 100 to 2000g.
3. If the weight input is not between 100 to 2000g, the
input will be invalid. A beep will sound and the unit
will not work until valid numbers are entered.
4. Press
to start defrosting and the cooking time
remaining will be displayed.
Time defrost function
1. Press , “dEF2” will display.
2. Press number pads to input defrosting time. The time
range is between 00:01 and 99:99.
3. The default microwave power is power level 3. If you
want to change the power level, press
once, and PL 3 will display; then press the number
pad for the desired power level.
4. Press
to start defrosting. The remaining cooking
time will be displayed.
Popcorn
1. Press , repeatedly until the number you wish
appears in the display, “50”, “100”g will display in
order. For example, press
once, “50” appears.
2. Press
to cook, oven beeps once. Oven beeps 5
times when cooking is finished.
Potatoes
1. Press repeatedly until the number you wish
appears in the display, “1”, “2”, “3” will display in order.
Press once: 1 potato (approx. 200g)
Press twice: 2 potatoes ( approx. 400g)
Press three times: 3 potatoes ( approx. 600g)
2. Press
to cook, oven beeps once. Oven beeps 5
times when cooking is finished.
Frozen vegetable
1. Press , repeatedly until the number you wish
appears in the display, “150”, “350”, “500” will display
in order.
2. Press
to cook, oven beeps once. Oven beeps 5
times when cooking is finished.
Drinks
1. Press repeatedly until the number you wish
appears in the display, “1”, “2”, “3” cup will display in
order. One cup is about 4.0 oz.
2. Press
to cook, oven beeps once. Oven beeps 5
times when cooking is finished.
Dinner plate
1. Press repeatedly until the number you
wish appears in the display, “250”, “350”, “500”g. will
display in order.
2. Press
to cook, oven beeps once. Oven beeps 5
times when cooking is finished.
Pizza
1. Press repeatedly until the number you wish
appears in the display, “100”, “200”, “400”g will
display in order.
2. Press
to cook, oven beeps once. Oven beeps 5
times when cooking is finished.
Memory Function
1. Press “0” to choose the memory 1-3 procedure.
The screen will display 1, 2, 3.
2. If a procedure has been set to memory, press
to use it. If not, continue to set the procedure. Only
procedures with one or two stages can be set.
3. After finishing the setting, press
once to save the
procedure and return to the waiting state. If is
pressed again, cooking will start.
Example: Setting the following procedure as the second
memory item, that is ‘Memory 2’. The procedure: to cook
the food with 80% microwave power for 3 minutes and
20 seconds.
The steps are as follows:
1. In waiting states, press “0” twice, stop pressing when
the screen displays “2”.
2. Press
once, then press “3, 2, 0” in order.
3. Press
then press “8” to select 80%
microwave power.
4. Press
to save the setting. A buzzer sounds once,
then it returns to waiting state. If you press twice
after Step 3, the procedure will be saved as ‘Memory
2’ and operated.
5. If the electricity is not cut off, the procedure will
always be saved. If the electricity is cut off, the
procedure will be reset.
6. If you want to run the saved procedure in waiting
states, press “0” twice, until the screen display is “2”,
then press
to run.
USING THE ACCESSORIES
WARNING
Refer to the safety chapters.
CAUTION
Do not cook food without the turntable set. Use only
the turntable set provided with the appliance.
IMPORTANT
Never cook food directly on the glass cooking tray.
Inserting the turntable set
1. Place the roller guide around the turntable shaft.
2. Before first use remove the tape from the centre of
the turntable shaft.
3. Place the glass cooking tray on the roller guide.
OPERATION (CONTINUED)
Multi stage cooking function
At most, 2 stages can be set for cooking. In multi-stage
cooking, if one stage is defrosting, then defrosting will
occur first automatically.
Note: Auto cooking cannot work in the multi-stage
cooking function.
Example: if you want to cook with 80% microwave power
for 5 minutes + 60% microwave power for 10 minutes, the
cooking steps are as follows:
1. Press
once, then press “5, 0, 0” to set the
cooking time.
2. Press
then press “8” to select 80%
microwave power.
3. Press
once, then press “1, 0, 0, 0” to set the
cooking time;
4. Press
then press “6” to select 60%
microwave power.
5. Press
to start cooking.
Inquiring function
1. When oven is cooking, press for the time of day
to appear for three seconds in the display.
2. When oven is in Microwave Cooking, press
pad for cooking power to appear for three seconds in
the display.
Lock function
To lock the microwave so that it cannot be operated by
children or other unintended users, press
pad for
3 seconds. You will hear a long beep and a lock icon will
appear on the display.
To unlock, press
for 3 seconds. You will hear a long
beep and the lock icon will disappear from the display.
Cooking end reminder function
The oven will beep five times to alert the user that
cooking time has ended.
Other specifications
1. When setting the cooking function, the function
abbreviation appears in the display.
2. When the microwave oven is cooking or paused
(door opened) in the midst of cooking time, the
remaining cooking time appears in the display.