User Manual

6 BEFORE FIRST USE
BEFORE FIRST USE
WARNING
WARNING
Refer to the safety chapters.
Initial cleaning and heating
Removing the microwave oven all of the protection foil on
the front. For more information see the chapter “CARE
AND CLEANING”.
Before the first use of the appliance,
• Before any functions can be activated the
clock needs to be set. Refer clock setting
instructions below.
• Before heating wipe the microwave oven interior
with a damp cloth to remove any residual packing
material.
• Touch
to choose the convection function.
Default temperature is 180°C. Press
so that
temperature flashes, then use + to increase
the temperature.
• Raise the temperature to 230°C (maximum
temperature). This can be achieved by using beside
proximity keys or the numeric keypad.
• Touch
symbol next to the sensor keys. Heat the
empty oven for at least an hour.
When you do this, make sure that the room is well
ventilated. Close the door to any other rooms to
avoid odor spreading through the house.
• Let the appliance cool down to room temperature.
Use a solution of neutral detergent mixed with hot
water to clean inside the microwave oven, then wipe
dry with a clean soft cloth. Keep the door open until
the inside of the oven is completely dry.
Clock Setting
When the microwave oven is turned on, “00:00” will blink,
buzzer will ring once.
1. Press
or
to set the right time (between 00:00
and 23:59.)
2. After you have set the right time, press
. The clock
has been set.
Changing the time
1. If you want to change the time, you have to press and
hold the
button for 3 seconds. The actual time
disappears and then the time will blink in the display.
Press
or
to set the new time and press the
button to confirm the setting.
2. When you set the clock, press
or
when adjusting
10MIN, short press time (each time you adjust 1MIN).