User Manual

8 9
WARNING!
Refer to the safety chapters.
Initial cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Refer to chapter “Care and cleaning”.
Each time a button is pressed, a beep will sound to
acknowledge the press.
During cooking program, press STOP/CLEAR to pause
the program, then press START/+30SEC to resume.
Press STOP/CLEAR twice to cancel the program.
End will display with beeps to remind the program is over,
and it will sound every two minutes until you press STOP/
CLEAR pad or open the door.
During the setting mode, the system will return to waiting
mode if there is not any operation within 1 minute.
Setting Digital Clock
With the microwave ready for input, press the TIMER/
CLOCK button to set the digital clock in 24 hours cycle.
FOR EXAMPLE: Suppose you want to set the microwave
clock time to 8:30.
• In standby mode, press TIMER/CLOCK button twice.
• Turn MENU/TIME to indicate the hour digit 8.
• Press TIMER/CLOCK button.
• Turn MENU/TIME dial to indicate the minute digits
until the screen shows 8: 30.
• Press TIMER/CLOCK to confirm the setting.
Note: You can press the TIMER/CLOCK button twice to
check clock time during cooking.
Setting The Timer
Touch TIMER/CLOCK pad once, if press START/+30SEC,
the timer began up timing, if turn MENU/TIME to set the
timer time, then press START/+30SEC, the timer began
dowm timing
NOTE:
• The maximum timer time is 95 minutes.
• In standby mode to set timer function,the screen
will display the time, at this point,you can set the
cooking program, but the microwave can not be
return standby mode.
• When the countdown ends, the buzzer will beep to
5 seconds remind you. the microwave automatically
standby return or cooking countdown to the state.
• You can check the time by touch TIMER/CLOCK pad
when cooking or pause program.
BEFORE FIRST USE HOW TO SET THE CONTROLS DAILY USE
Microwave Cooking
To cook with microwave power alone, press the button
a number of times to select a cooking power level, and
then use the MENU/TIME dial to set a desired cooking
time. The longest cooking time is 95 minutes.
Select power level by pressing the
button:
PRESS POWER LEVEL DISPLAY
Once 100% HI
Twice 80% M- HI
3 times 60% MED
4 times 40% M-LO
5 times 20% LO
For example, suppose you want to cook for 5 minutes at
60% of microwave power.
1. In waiting mode, place food into microwave, and
close the door.
2. Press
repeatedly until MED is shown.
3. Turn MENU/TIME dial to 5:00.
4. Press START/+30SEC to confirm.
Multi-Stage Cooking
1. In waiting mode, place food into microwave, and
close the door.
2. Select first stage of cooking process by pressing
power until the desired power level is chosen.
Then select time desired.
3. Press power until the desired power level for the
second stage is chosen. Then select time desired
for second stage.
4. Press START/+30SEC to confirm.
Note: Quick start, auto cook cannot be set in multi-stage
cooking program.
Quick Start
This feature allows you to start the microwave quickly at
full power.
In waiting mode, press START/+30SEC a number of times
to set the cooking time, the microwave starts work at full
power level immediately. During cooking, you can add
cooking time by pressing START/+30SEC dial up to
95 minutes.
Defrost
A. Jet defrost
1. In waiting mode, place food into microwave, and
close the door.
2. Press
and
TIME
will display.
3. Turn MENU/TIME to select the cooking time (the
maximum is 95 minutes).
4. Press START/+30SEC to confirm.
B. Weight defrost
The microwave can quickly defrost food to the set time
you entered.
FOR EXAMPLE: Suppose you want to defrost shrimp.
1. In waiting mode, place food into microwave, and
close the door.
2. Press
button twice until
WEIGHT
display.
3. Turn MENU/TIME to enter the food weight
(100g~1000g).
4. Press START/+30SEC to confirm.
Favourite
This function can store up to three cooking modes.
In standby mode press the
either once, twice to three
times to select favourite 1, 2 or 3. Then hold the
for 2
seconds. The corresponding favourite number will flash.
Select power with
and time with dial. Press to save.
The number will stop flashing.
Memory
This feature will remember the last setting. Select , then
the required time using the dial, then press START/+30S.
Child Lock
Use to prevent unsupervised operation of the microwave
by little children. The CHILD LOCK indicator will show
up on display screen, and the microwave can not be
operated while the CHILD LOCK is set.
To set the CHILD LOCK: Press and hold the
STOP/CLEAR button for 3 seconds, a beep sounds and
lock indicator lights.
To cancel the CHILD LOCK: Press and hold the STOP/
CLEAR button for 3 seconds until lock indicator on
display goes off. The system will return to normal.