User manual

INSTALLATION

WARNING

Fitting oven shelves

1. Ensure shelf orientation is correct

(refer to diagram below).

2. Slide oven shelves onto oven supports (side runners) at

an angle until raised back of shelf is past the stop on

oven supports (side runners).

3. Lower front of shelf and push in until stop is reached.

4. To remove oven shelves, withdraw to the stop and raise

the front of shelf to clear the stop.

Not a shelf

position

5 shelf positions

NOTE: The top ledge is not a shelf position.

There are no stops for shelf withdrawal.

Assemble grill tray handle

Assemble grill tray handle as shown

Fitting the grill dish supports

• Insert the rear hook into the rear hole.

• Align the front peg to the front hole and push in firmly.

Fitting the grill dish

Separate grill

Ensure rear of the dish is engaged with the side support

before sliding backwards. To remove, simply pull forwards

and upwards.

Engagement of

rear dish

Grill in oven

(Refer to Fitting Oven Shelves)

The grill dish with wire insert can be used in any of the

two upper height positions (shelf positions 4 and 5)

between the runners.

NOTE: You must remove the grill dish when baking in the oven.

Grill dish

insertion

Grill dish

final position

Note the orientation of the

side and rear features