User Manual

PREPARING THE VACUUM CLEANER

1. Carefully unpack your cordless vacuum cleaner.

2. Remove packaging around the vacuum cleaner, power cord and AC plug.

Do not remove warning labels.

3. Lay all components out on the ﬂoor ready for assembly.

INSTALL & CHARGE OF BATTERY PACK

When the vacuum cleaner power is insufﬁcient or

the vacuum cleaner is being charged for the ﬁrst

time, please fully charge the vacuum cleaner battery.

The battery can be charged in 2 different ways. It can

be charged directly through the handheld vacuum

cleaner (the battery capacity indicator will indicate the

state of the battery) or the battery can be removed and

charged separately. Please remember to charge the battery

after each cleaning session or when the battery is low.

1. Charging the battery separately:

Plug the charger cable into the power inlet located on

the back of the battery and the charger plug into the

power socket. When charging, the energy indicator

light will illuminate RED. Once fully charged this

indicator light will change to BLUE. Once fully

charged, turn the charger cable plug off at the

power socket and remove the charger cable from

the battery. Slide the battery into the vacuum

cleaner body. The vacuum cleaner is now ready for use.

1. Charging the battery through the vacuum cleaner:

Slide the battery into the vacuum cleaner body. Plug

the charger cable into the power inlet located on the

back of the battery and the charger plug into the

power socket. When there is little or no battery power,

the three battery capacity indicator lights will emit a

ﬂickering light. Whilst charging, the number of lights

will illuminate one by one indicating the charge level.

Two lights illuminated indicates the battery is 50%

charged and three lights indicates 100% charged.

Once fully charged, turn the charger cable plug off

at the power socket and remove the charger cable

from the battery. The vacuum cleaner is now ready

for use.

Note: The total charging time is about 4-5hours.

Battery capacity indicator