User Manual

CLEANING & CARE (CONTINUED)

After extended periods of use, the power brush head and roller will require cleaning

to remove hair and other foreign objects that have become tangled or stuck,

preventing the vacuum cleaner from operating effectively. Regular cleaning is

recommended and described in the steps below.

1 . Pull downwards on the brush roller locking clip (A) and lift the locking lever

(B) in an upwards motion.

2. Lift the brush roller (C) from the power brush head housing.

3. Wipe the power brush head (D) down with a damp cloth to remove debris and

dirt particles. Do not expose or immerse the power brush head (D) in water or

any other liquid as the electronic components inside will be damaged.

4. Clean and remove any hairs and ﬁbers from the brush roller (C) then rinse

under running water. Do not use harsh cleaning agents. Allow to completely

dry before reassembly.

5. To reassemble, place the brush roller (C) back into the power brush head

housing (D). Pull downwards on the brush roller locking clip (A) and lower the

locking lever (B). Once the locking lever (B) has been lowered, release the

locking clip (A) to secure.

Cleaning power brush head and roller

(1) (2)