User Manual

CLEANING & CARE
1. W
mains plug or vacuum cleaner body in water or any other liquid.
ARNING: Do not under any circumstances immerse the power cord,
2.
WARNING: Do not attempt to clean the unit whilst it is still plugged into
the electrical power outlet. Always unplug the unit before cleaning.
3. D
1. Disconnect the conductive metal tube and or accessories
from the vacuum cleaner body.
2. Over a waste bin, press the dust cover release button
to open the dust cover and disperse contents into
a waste bin. Wipe clean only. Do not submerge the
the dust container or any other part in water or any liquids.
When emptied, close the dust cover by pressing the cover
back onto the dust cannister. When successfully installed,
the dust cover will "click" into place.
o not use harsh or abrasive cleaning agents. The outside surface may be
wiped clean with a soft, damp cloth and dried thoroughly. If necessary, a mild
dishwashing detergent may be applied to the cloth but not directly applied to
t
cleaner body into a dishwasher.
he vacuum cleaner or accessories. Do not place any accessories or vacuum
Emptying the dust container
1. Disconnect the tube or accessories from the vacuum
cleaner body.
2. Press the dust container release button and rotate the
container clockwise to release. Remove the dust container.
Wipe clean only. Do not submerge the dust container in
water or any liquids.
3. Once the dust container has been removed, rotate the filter
assembly clockwise to release. Remove the filter assembly.
4. Once the filter assembly has been removed, remove the fine
particle filter. The filter assembly and fine particle filter can be
submersed and thoroughly rinsed. Do not scrub with abrasive
products as this may damage the fine particle filter.
Allow to dry thoroughly before reassembly.
Disassembly and cleaning of the dust container and filters
Dust container
release button.
Dust
container.
Filter
assembly.
Fine particle
filter.
8