Installation Manual

CLEANING & CARE

mains plug or vacuum cleaner body in water or any other liquid.

ARNING: Do not under any circumstances immerse the power cord,

WARNING: Do not attempt to clean the unit whilst it is still plugged into

the electrical power outlet. Always unplug the unit before cleaning.

3. D

1. Turn off and unplug the vacuum cleaner.

2. Remove the dust container and take the ﬁlter out.

3. Gently knock ﬁlter over a dustbin to remove debris.

4. Reinsert the ﬁlter into the dust container.

5. Reinsert the dust container into the vacuum

cleaner and ensure securely seated.

o not use harsh or abrasive cleaning agents. The outside surface may be

wiped clean with a soft, damp cloth and dried thoroughly. If necessary, a mild

dishwashing detergent may be applied to the cloth but not directly applied to

the vacuum cleaner

Cleaning the motor ﬁlter

1. Turn off and unplug the vacuum cleaner.

2. Open the exhaust ﬁlter cover.

3. Rinse the ﬁlter under cold water and allow dry.

4. Reinsert the ﬁlter into the exhaust cavity.

5. Reﬁt the exhaust ﬁlter cover.

Cleaning the exhaust air ﬁlter

NOTE: The motor ﬁlter may also be rinsed with water if required. When rinsing

with water, ensure the ﬁlter is completely dry before reinserting back into the

dust container and recommencing use of the vacuum cleaner.