USER MANUAL INDUCTION COOKTOP WHI324BA
CONGRATULATIONS CONTENTS Dear customer, Important safety instructions.........................................................3 Congratulations on the purchase of your new cooktop. Installation instructions.....................................................................5 Before you use the cooktop, we recommend that you read through the whole user manual which provides the description of the cooktop and its functions.
IMPORTANT SAFETY INSTRUCTIONS under a window. This prevents hot cookware to fall from the appliance when the door or the window is opened. TIPS & INFORMATION IMPORTANT Check for any damage or marks If you find the cooktop is damaged or marked, you must report it within 7 days if you wish to claim for damage/ marks under the manufacturer’s warranty. This does not affect your statutory rights. ENVIRONMENT ENVIRONMENTAL TIPS Information on disposal for users • All of the packaging materials are recyclable.
IMPORTANT SAFETY INSTRUCTIONS Use WARNING WARNING WARNING WARNING Risk of injury, burns or electric shock. • Use this appliance in a household environment. • Do not change the specification of this appliance. • Do not use an external timer or a separate remotecontrol system to operate the appliance. • Do not let the appliance stay unattended during operation. • Do not operate the appliance with wet hands or when it has contact with water.
INSTALLATION INSTRUCTIONS Built-in appliances • Only use the built-in appliances after you assemble the appliance into correct built-in units and work surfaces that align to the standards. TIPS & INFORMATION IMPORTANT Before the installation, note down the serial number (Ser. Nr.) from the rating plate. The rating plate of the appliance is on its lower casing. Connection cable • Use the correct mains cable of type H05BB-F Tmax 90°C (or higher) for a single phase or two phase connection.
INSTALLATION INSTRUCTIONS (CONTINUED) WHI324BA Technical data WHI324BA R 5mm 600mm = 490 +1mm 270 +1mm = PNC 949 163 288 Product dimensions (w x d) mm 300 x 520 Cut-out dimensions (w x d) mm 270 x 490 Voltage (volts) 220-240 Cycles (Hz) 50-60 Total power 3700 Elements (Watts) 2 Front (Watts) 1400/2500 Rear (Watts) 2300/ 3200 min. 38mm min.
PRODUCT DESCRIPTION WHI324BA 1 Induction cooking zone 2300 W, with Power function 3200 W 2 Induction cooking zone 1400 W, with Power function 2500 W 210 1 140 2 3 Control panel 3 1 2 3 4 5 6 5 6 7 8 9 Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate.
PRODUCT DESCRIPTION (CONTINUED) Heat setting displays DISPLAY DESCRIPTION The cooking zone is deactivated. The cooking zone operates. - The Keep Warm function operates. The Automatic Heat-up function operates. The cookware is incorrect or too small, or there is no cookware on the cooking zone. There is a malfunction. A cooking zone is still hot (residual heat). The Lock/Child Safety device operates. The Power function operates. The Automatic Switch-Off operates.
OPERATING INSTRUCTIONS Activation and deactivation Touch for 1 second to activate or deactivate the appliance. Automatic switch off The function deactivates the appliance automatically if: • All cooking zones are deactivated ( ). • You do not set the heat setting after you activate the appliance. • You spill something or put something on the control panel for more than 10 seconds, (a pan, a cloth, etc.). The sound operates until you remove the object. Remove the object or clean the control panel.
OPERATING INSTRUCTIONS (CONTINUED) Timer Use the timer to set how long the cooking zone operates for one cooking session. You can set the heat setting before or after you set the timer. again and again • To set the cooking zone: touch until the indicator of the necessary cooking zone comes on. • To activate or change the Timer: touch or of the timer to set the time (00 - 99 minutes). When the indicator of the cooking zone starts to flash slow, the time counts down.
HELPFUL HINTS AND TIPS The noises during operation TIPS & INFORMATION IMPORTANT Use the induction cooking zones with correct cookware. • Cookware made of enamelled steel and with aluminium or copper bottoms can cause discolouration on glass ceramic surface. If you can hear • crack noise: cookware is made of different materials (Sandwich construction).
CARE AND CLEANING Care and cleaning Clean the appliance after each use. Always use cookware with clean bottom. TIPS & INFORMATION IMPORTANT Sharp objects and abrasive cleaning agents will damage the appliance. For your safety, do not clean the appliance with steam blasters or high-pressure cleaners. TIPS & INFORMATION IMPORTANT Scratches or dark stains on the glass ceramic cause no effect on how the appliance operates. To remove the dirt: 1.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE AND REMEDY REMEDY Red rings, limescale or water rings, shiny metallic or other discolouration, scratches/shadows, bubbles or other miscellaneous marks or stains on ceramic glass cooktop surface. • Cooktop surface has not been cleaned correctly. Cleaning/ maintenance of the cooktop surface is not covered under warranty. If a service call is placed to clean the cooktop you will be charged for the visit. • Use a ceramic glass cleaner such as Cerapol.
TROUBLESHOOTING (CONTINUED) PROBLEM POSSIBLE CAUSE AND REMEDY REMEDY The heat setting changes between two levels. •T he Power management is activated. • See the section Power management. The sensor fields become hot. •T he cookware is too large or you out it too near to the controls. • Put large cookware on the rear cooking zones if it is necessary. comes on • The Automatic Switch Off operates. • Deactivate the appliance and activate it again.
Warranty FOR SALES IN AUSTRALIA AND NEW ZEALAND APPLIANCE: BUILT-IN OVEN, COOKTOP AND FREESTANDING COOKERS This document sets out the terms and conditions of the product warranties for Electrolux Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should you require service for your Appliance. 1.
For more information on all Westinghouse appliances, or for dimension and installation information, call into your retailer, phone or email our customer care team or visit our website: AUSTRALIA phone: 1300 363 640 fax: 1800 350 067 email: customercare@electrolux.com.au web: www.westinghouse.com.au NEW ZEALAND phone: 0800 436 245 fax: 0800 225 088 email: customercare@electrolux.co.nz web: www.westinghouse.co.
