User Manual

8 9DESCRIPTION OPERATING INSTRUCTIONS
Heat setting displays
DISPLAY DESCRIPTION
The cooking zone is deactivated.
-
The cooking zone operates.
The Keep Warm function operates.
The Automatic Heat-up function operates.
The cookware is incorrect or too small, or there is no cookware on the cooking zone.
There is a malfunction.
A cooking zone is still hot (residual heat).
The Lock/Child Safety device operates.
The Power function operates.
The Automatic Switch-Off operates.
OptiHeat Control ( 3 step residual heat indicator)
WARNING
WARNING
Risk of burns from residual heat!
OptiHeat Control shows the level of the residual heat.
The induction cooking zones make the heat necessary
for cooking directly in the bottom of the cookware.
The glass ceramic is hot from the heat of the cookware.
ENVIRONMENTAL TIPS
ENVIRONMENT
Disposal
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed
information about recycling of this product, please
contact your local council, your household waste disposal
service or the shop where you purchased the product.
Packaging material
The packaging materials are friendly to the environment
and can be recycled. The plastic components are
identified by marking: >PE<,>PS<, etc. Discard the
packaging materials as household waste at the waste
disposal facilities in your municipality.
OPERATING INSTRUCTIONS
Activation and deactivation
Touch for 1 second to activate or deactivate
the appliance.
Automatic switch off
The function deactivates the appliance automatically if:
• All cooking zones are deactivated (
).
• You do not set the heat setting after you activate
the appliance.
• You spill something or put something on the control
panel for more than 10 seconds, (a pan, a cloth, etc.).
The sound operates until you remove the object.
Remove the object or clean the control panel.
• The appliance become too hot (e.g. when a saucepan
boils dry). Before you use the appliance again, the
cooking zone must be cool.
• You use incorrect cookware. The symbol
comes on
and the cooking zone deactivates automatically after
2 minutes.
• You do not deactivate a cooking zone or change the
heat setting. After some time,
comes on and the
appliance deactivates. See the table.
The times of Automatic Switch Off
HEAT SETTING COOKING ZONE DEACTIVATES AFTER
-
6 hours
-
5 hours
4 hours
-
1.5 hours
The heat setting
Touch the control bar at the heat setting. Chnage to the
left or the right, if it is neccessary. Do not release before
you have a correct heat setting. The display shows the
heat setting. (applies to WHI645BC and WHI945BC)
Automatic heat up
You can get a necessary heat setting in a shorter time if you
activate the Automatic Heat Up function. This function sets
the highest heat setting for some time (see the illustration
above), and then decreases to the necessary heat setting.
To start the Automatic Heat Up function for a
cooking zone:
1. Touch . The symbol comes on in the display.
2. Immediately touch
adjacent to the element
you want to control. The symbol comes on in
the display.
3. Immediately touch
adjacent to the element you
want to control again and again until the necessary
heat setting comes on. After 3 seconds
comes on
in the display.
4. To stop the function touch
adjacent to the element
you want to control.
Power function
The Power function makes more power available to the
induction cooking zones. The Power function is activated
for 10 minutes at most. After, that the induction cooking
zone automatically sets back to highest heat setting.
To activate, touch
, comes on. To deactivate, touch
or
adjacent to the element you want to control.
PRODUCT DESCRIPTION (CONTINUED)