MSDS

Skin: No specific first aid measures are required. As a precaution, remove clothing and shoes if
contaminated. To remove the material from skin, use soap and water. Discard contaminated clothing
and shoes or thoroughly clean before reuse.
Ingestion: No specific first aid measures are required. Do not induce vomiting. As a precaution, get
medical advice.
Inhalation: No specific first aid measures are required. If exposed to excessive levels of material in the
air, move the exposed person to fresh air. Get medical attention if coughing or respiratory discomfort
occurs.
8. FIRE FIGHTING MEASURES
Flammable Properties
Flash Point: 415 F, 212.8 C Test Method: ASTM 3278 - Closed Cup
Autoignition Temperature: No data available
NFPA Classification: Class III-B combustible liquid
Extinguishing Media: Use dry chemical, foam, or carbon dioxide.
Unusual Fire and Explosion Conditions: Dense smoke may be generated while burning. Carbon
monoxide, carbon dioxide, and other oxides may be generated as products of combustion.
Hazardous Combustion By-Products: None
9. ACCIDENTAL RELEASE MEASURES
Personnel Safeguards: Wear safe glove and safe glasses. Avoid direct physical contact with the
product.
Regulatory Notifications: Notify appropriate authorities of spill.
Containment and Clean up: Contain spill immediately. Do not allow spill to enter sewers or
watercourses. Absorb with appropriate inert material such as sand, clay, etc. Large spills may be
picked up using vacuum pumps, shovels, buckets, or other means and placed in drums or other
suitable containers.
10. HANDLING AND STORAGE INFORMATION
Handling: Fire extinguishers should be kept readily available.
Storage: Do not transfer to unmarked containers. Store in closed containers away from heat, sparks,
open flame, or oxidizing materials.
Empty Container Warnings
Drums: Empty drums should be completely drained, properly bunged and promptly returned to a
drum reconditioner, or properly disposed.
Plastic: Empty container may retain product residues.
Other: No information available
11. DISPOSAL INFORMATION
Regulatory Information: All disposals must comply with local applicable regulations. The material, if
spilled or discarded, may be a regulated waste. Refer to applicable regulations.