User's Manual

30 USING YOUR OVEN
Setting the cook time
1. Use the knobs to select the desired oven function
and cooking temperature.
2. Touch the
button as often as necessary, until
the ‘cook time’ symbol appears.
3. Set the desired cooking time commencing with
minutes by using
or , whilst the symbol is
flashing, then touch the
button again and set
the hours by using
or . After 5 seconds from
the last time adjustment the
symbol will stop
flashing. The appliance is now programmed and
the display will countdown to zero.
4. When the set time has elapsed, a signal will sound
and the appliance will turn off. To stop the signal,
touch any button on the clock and then turn the
oven function selector to OFF.
NOTE: Cooking time cannot be set for the Rapid
Heat function.
The feature can be cancelled at any time by returning
the function selector to OFF.
Setting the oven function
1. Turn the oven selector clockwise to select
the desired oven function. The default temperature
for that function will be shown on the display.
2. After 5 seconds from the last change, the oven will
begin heating and the “Elapsed time” commences on
the display.
Changing the oven temperature
1. Toggle the selector left ( ) or right ( ) as
required to set the desired cooking temperature. The
temperature setting changes in increments of 5°C.
2. The set temperature is displayed for 5 seconds from
the last change.
NOTE: The temperature can be adjusted at any time.
Oven temperature cannot be changed for the Defrost or
Pyro function.
Setting the end time
1. Use the knobs to select the desired oven function
and cooking temperature.
2. Touch the
button as often as necessary, until
the ‘end time’ symbol appears.
3. Set the desired end time commencing with hours
using
or
whilst the
symbol is flashing, then
touch the
button again and set the minutes by
using
or . After 5 seconds from the last time
adjustment the
symbol will stop flashing and the
appliance is now programmed.
4. When the set time has elapsed, a signal will sound
and the appliance will turn off. To stop the signal,
touch any button on the clock and then turn the
oven function selector to OFF.
NOTE: Stop time cannot be set for the Rapid Heat function.
USING YOUR OVEN (CONTINUED)
Setting the delayed start cooking time
The ‘cook time’ and ‘end time’ functions can be
combined to switch the oven on and off at a specific
time during the day.
1. Use the knobs to select the desired oven function
and cooking temperature.
2. Touch the
button as often as necessary, until the
‘cook time’
symbol appears.
3. Set the desired cooking time by using
or , whilst
the
symbol is flashing.
4. Touch the
button as often as necessary, until the
‘end time’
symbol appears flashing.
5. Set the desired switch-off time using
or
whilst
the ‘end time’
symbol is flashing.
6. 5 seconds after the last change the ‘cook time’ and
‘end time’ arrows are lit to confirm that the oven has
been programmed.
7. When the delayed start cooking time has elapsed,
a signal will sound and the appliance will turn off.
To stop the signal, press any button on the clock
and then turn the oven function selector to OFF.
NOTE: Delayed start cooking time cannot be set for the
Rapid Heat function. The feature can be cancelled at any
time by returning the function selector to OFF.