USER MANUAL Enjoy peace of mind. Register your appliance today. Stay updated on better living services, safety notices and shop for accessories. 1. O pen the camera app on your smartphone and point at the QR code to scan Product Registration QR code is located on the front of your appliance or inside the door rim*. 2. Tap the notification or link to open the registration form 3.
CONGRATULATIONS CONTENTS Congratulations and thank you for choosing our product. Important safety instructions....................................................... 3 We are sure you will find your new cooker a pleasure to use and a great asset to your cooking. Before you use the appliance, we recommend you read through the whole user manual which provides a description of the product and its functions.
GAS COOKTOP MODELS IMPORTANT SAFETY INSTRUCTIONS Freestanding cooker with flame safeguard gas cooktop and multi-function electric oven WARNING WARNING Oven • During use the appliance becomes hot. Care should be taken to avoid touching the hot surfaces inside the oven. • Switch the appliance off at the isolating switch before removing the oven light glass for globe replacement.
CERAMIC COOKTOP MODELS INSTALLATION OF THE APPLIANCE Freestanding cooker with electric ceramic hob and multi-function electric oven Cabinet requirement Stainless steel splashback Hob element controls Oven control panel Ceramic glass hob (Refer to Chapter‘Get to know your ceramic cooktop’) Oven door Models WFE904SD, WFE915SD, WFE916DSD, WFEP917DSD & WFE946SD are designed to fit into a 900mm wide gap between standard kitchen cabinets.
INSTALLATION OF THE APPLIANCE (CONTINUED) Freestanding installation Freestanding installation (continued) Gently close the door until it comes to a stop. Then lift the door off the hinge. Installation of screw-in feet • Freestanding appliance are supplied with four screw-in feet in the internal accessory pack. The screw-in feet can be adjusted by turning the lower half clockwise or anti-clockwise.
INSTALLATION OF THE APPLIANCE (CONTINUED) Bench height + 10mm minimum Leveling oven Freestanding installation (continued) Place a level in the oven as below making sure the level sits on the front and rear forms. Adjust the feet accordingly to level the appliance. Installation the anti-tilt brackets To ensure cooker stability, the anti-tilt brackets must be installed. There are left and right engagement slots for the anti-tilt bracket at the bottom rear of the appliance.
INSTALLATION OF THE APPLIANCE (CONTINUED) Freestanding installation (continued) Freestanding installation (continued) • Connect services to the appliance prior to placing into cavity. WARNING WARNING • To locate appliance, slide into cavity ensuring the anti-tilt brackets fully engaged with the rear left and right engagement slots. • Appropriate fasteners must be used to suit the type of wall on which the anti-tilt brackets are installed.
INSTALLATION OF THE APPLIANCE (CONTINUED) Freestanding installation (continued) Slot-in installation Make sure both clip modules are in the same orientation after installation. Clip the kick panel onto the front feet of the appliance. Make sure the kick panel snaps onto the larger section of the front feet. The slot-in type installation use the appliance as supplied. The appliance can be mounted on a plinth.
INSTALLATION OF THE APPLIANCE (CONTINUED) WIRING REQUIREMENTS Slot-in installation (continued) The cooker MUST be installed in compliance with: Connecting to services and commissioning • Wiring connections in AS/NZS 3000 Wiring Rules. This appliance must be installed by an authorised person, according to all codes and regulations of: • The anti-tilt brackets are to be secured to the back wall with appropriate fasteners.
LPG CONVERSION GAS COOKTOP MODEL INSTALLING THE FREESTANDING COOKER Models WFE904SD, WFE915SD, WFE916DSD, WFEP917DSD & WFE946SD Gas hose restraints point to regulator Models: WFE904SD, WFE915SD, WFE916DSD, WFEP917DSD 168 The following table shows the injector sizes for each burner. Gas connection point to regulator Models: WFE904SD, WFE915SD, WFE916DSD, WFEP917DSD 278 Gas pressures The following table shows the supply and operating pressures for various gases.
TESTING THE OPERATION OF THE GAS COOKER 1. Check the manometer zero point is correct. When maximum flame appearance is correct, then check the turn-down setting on each burner. If the settings appear to be incorrect, proceed as follows: 2. Connect the manometer to the cooker pressure test point. This is located on the regulator or LPG inlet fitting. 1. Adjust the bypass screw mounted on the body of each hotplate control cock. This is accessible when the control knob and the control panel are removed. 3.
INSTALLING YOUR OVEN ACCESSORIES Slides (telescopic runners) (on selected models) 1. The selected models are supplied with a set of slides and instructions on how to assemble. Ensure the rack and slides are of the same hand. E.g. left hand slide should be fitted on the left hand rack. Installing the side racks Fitting grill dish and insert 1. Insert the rear peg into the rear access hole provided, ensuring peg is fully inserted. Your oven comes with a full width grill dish and a grill insert.
INSTALLING BURNERS AND TRIVETS GETTING TO KNOW YOUR COOKTOP Installing burners Trivet installation sequence Model WFE904SD & WFE915SD The burner crown must be fitted correctly into the burner cup or damage will occur during operation. Install the middle trivet first by aligning the trivet with the wok burner and gently placing the trivet on hob. • To do this, ensure that the 2 ribs on either side of the spark plug hole are positioned into the 2 slots on the burner cup.
GETTING TO KNOW YOUR COOKTOP (CONTINUED) Ceramic hotplates (WFE946SD) GETTING TO KNOW YOUR CERAMIC COOKTOP A flat or slightly concave pan is preferable for ceramic hotplates The cooktop is made from ceramic glass, a tough, durable material that withstands heating and cooling without breaking. It is strong enough to hold the heaviest utensils. Ceramic cooktop controls 3 4 5 1 2 5 6 7 5 However, it must be remembered that as it is GLASS, it may break.
USING YOUR CERAMIC COOKTOP Switching the ceramic cooktop on and off CONTROL PANEL Switch on Locking/unlocking the control panel DISPLAY Touch for 2 seconds / Switch off Touch for 2 seconds / none TIPS INFORMATION TIPS&AND INFORMATION After switching on, within approx. 10 seconds a heat setting or a function must be set, otherwise the appliance automatically switches itself off.
USING YOUR CERAMIC COOKTOP (CONTINUED) Using the timer FUNCTION Pause OUTCOME AFTER THE TIME HAS LAPSED CONDITION Displaying the time remaining for a cooking zone The function sets all cooking zones that operate to the lowest heat setting . When operates, you cannot change the heat setting.
USING YOUR OVEN Understanding your oven functions Bake/Pizza Grill Rapid Heat This function can be used for a quicker pre-heat of your oven. Heat comes from the elements surrounding the fans as well as the smaller element above the food. This will heat up your oven 30% faster. AirFry “Pizza” is a combination of “Base heat” and “Fan bake” and offers you the combined benefits of both functions. Heat comes from the element surrounding the fan as well as the clean heat element below the oven floor.
USING YOUR OVEN (CONTINUED) On completion of cooking • The heat source will turn off, the timer will beep and the end time and/or cook time ‘indicators’ will flash. Operating the touch control clock models WFE915SD, WFE916DSD, WFE946SD 31 • Even though the heating element turns off the oven will still retain substantial heat. This will continue to cook the food until it is removed or the oven cools down.
USING YOUR OVEN (CONTINUED) Setting the cook time Setting the delayed start cooking time Additional Functionality 1. Use the knobs to select the desired oven function and cooking temperature. Setting the countdown timer 2. button as often as necessary, until Touch the the ‘cook time’ symbol appears. The ‘cook time’ and ‘end time’ functions can be combined to switch the oven on and off at a specific time during the day. 3.
EASYBAKE +STEAM COOKING TEST Your WFEP917DSD has the ability to add steam while baking. Cooking with steam is a great addition to straight ‘hot air’ cooking. Steam brings out all the natural flavours and goodness in the food, cooks evenly from surface to centre and retains more nutrients and vitamins. Steam assisted cooking consistently produces juicy, succulent interiors with crisp, golden exteriors.
COOKING GUIDE Choosing the best oven settings EasyBake +Steam function The following table is intended as a guide and experience may show some variation in cooking times necessary to meet individual requirements. We recommend that you preheat your oven for 30 minutes.
COOKING GUIDE (CONTINUED) Grilling Guide DEALING WITH COOKING PROBLEMS (see also TROUBLESHOOTING) PROBLEM CAUSES REMEDIES Uneven cooking: • Incorrect shelf position. – Select shelf that puts food in the centre of the oven. Always clean the grill/oven dish after every use. Excessive fat build up may cause a fire. •O ven tray too large. – Experiment with other trays or dishes. Grilling is conducted with the oven door closed •T rays not centralised. – Centre trays.
CLEANING YOUR OVEN CLEANING YOUR OVEN ACCESSORIES Gas hotplate WARNING WARNING • Always make sure that the oven is electrically isolated before cleaning. This can be done by the functional switch nearby. • The trivets can be removed for cleaning by carefully lifting them from the hob. Removing the trays and shelves from your appliance • Clean by washing with warm soapy water. • Slide the dish and grill tray towards you until they reach the front stop.
CLEANING YOUR OVEN ACCESSORIES (CONTINUED) Cleaning your oven door WARNING WARNING • DO NOT use the oven without the inner and middle door glass fitted. STEAM ASSISTED CLEANING Changing the light globes • There are 2 light globes located in the top of the oven cavity towards the front. The light globe glass is accessible between the passes of the upper element. • To remove, turn oven light glass anti-clockwise.
CLEANING YOUR PYROLYTIC OVEN WFEP917DSD Pyrolytic cleaning of the oven cavity TROUBLESHOOTING TIPS & INFORMATION IMPORTANT The oven has the Pyrolytic self-cleaning function, it cleans by burning off the spatters and accumulated dirt and grease from the oven liner, at high temperature. This process produces ash which can then be wiped out of the oven cavity. It is recommended you clean your oven regularly to keep the oven in its best condition.
Warranty FOR SALES IN AUSTRALIA AND NEW ZEALAND APPLIANCE: WESTINGHOUSE BUILT-IN OVENS, COOKTOPS AND FREESTANDING COOKER TROUBLESHOOTING (CONTINUED) NOTE: Only authorised personnel should carry out servicing. If the household fuse continues to blow, call the Customer Care Centre. In the event of a power failure the gas burners may be lit with a hand held igniter and used. Take care to avoid letting unburnt gas flow for more than 5 seconds when attempting to light the burner.
For more information on all Westinghouse appliances, or for dimension and installation information, call into your retailer, phone or email our customer care team or visit our website: AUSTRALIA phone: 13 13 49 email: customercare@electrolux.com.au web: westinghouse.com.au NEW ZEALAND phone: 0800 10 66 10 email: customercare@electrolux.co.nz web: westinghouse.co.nz and WESTINGHOUSE are trademarks of Westinghouse Electric Corporation. Used under license by Electrolux Home Products Pty Ltd.
