User Manual

38 SLOT-IN INSTALLATION
Slot-in Installation
INSTALLATION OF THE APPLIANCE
To remove the appliance kick panel
• Remove all loose parts i.e. Burner crowns and caps,
trivets, oven shelves.
• Carefully lay down the appliance onto one side
onto foam packaging and remove the screws as
shown from each corner bracket.
Remove 4 screws on
each corner bracket
Slot in conversion
To convert the free standing appliance to a slot in
installation the kick panel provided on the appliance
is removed and the appliance is mounted on a plinth.
This enables a continuous cupboard kick board to be
installed, giving a more integrated appearance. There is no
clearance requirement between oven and adjacent side
cabinets.
Remove 4 screws on
each corner bracket
600mm minimum
vertical clearance
from combustible
surfaces
600mm
755mm NOM
900mm minimum
This surface is to be level
with the top edge of the
kickboard