User Manual

22 USING YOUR OVEN
Changing the oven temperature
1. Press “–” or “+” symbols to decrease or increase
the temperature setting. The temperature setting
changes in increments of 5°C.
NOTE: The temperature can be adjusted at any time.
Oven temperature cannot be changed for the Defrost
function. For model WVEP916SB & WFEP915SB, oven
temperature cannot be changed for the Pyro (P1)
function.
Setting the cooking duration
1. Select the desired oven function and cooking
temperature.
2. Press “Timer” button repeatedly until the “Cook
time” symbol “
” appears flashing with the “Timer
arrow” symbol “ “ on the display.
3. Set the desired cooking duration by pressing “–” or
“+” symbols while the “Timer arrow” symbol “
“ is
flashing.
4. After 5 seconds from the last change, the “Timer
arrow” symbol “
“ will disappear confirming the
cooking duration is set.
NOTE: Do not forget to add pre-heating time if
necessary.
Setting the cooking end time
1. Select the desired oven function and cooking
temperature.
2. Press “Timer” button repeatedly until the “End
time” symbol “
” appears flashing with the “Timer
arrow” symbol “
“ on the display.
3. Set the desired time of day to finish cooking by
pressing “–” or “+” symbols while the “Timer arrow”
symbol “
“ remains flashing.
4. After 5 seconds from the last change, the “Timer
arrow” symbol “
“ will disappear confirming the
cooking end time is set.
Setting the delayed start cooking time
1. Program the “Cook time” and “End time” as
described in the relevant sections. Once both
the “Cook time“ and “End time“ have been set,
the “Cook time“ and “End time” indicators will
stop flashing and the “Set temperature” will be
displayed.
NOTE: Do not forget to add pre-heating time if
necessary.
Operating the Programmable Controller
(WVEP916SB, WVE916SB, WFEP915SB &
WFE946SB)
(WFE916SB)
General features
The oven is equipped with a programmable controller
that can be used to turn the oven on and off
automatically. The “Cook time” function automatically
turns the oven off after a set amount of time. The
“End time” function is used to set the time of day you
want the cooking cycle to finish. A “Delayed start” is
possible by combining the “Cook time” and “End time”
features to switch the oven on and off at a specific
time during the day.
Setting the time of day (after electrical connection)
1. After the appliance has been electrically connected,
the “Set clock” symbol “
” will flash on the display.
2. To set the time of day, press “–” or “+” symbols
while the “Set clock” symbol “
” is flashing.
3. After 5 seconds from the last change, the “Timer
arrow” symbol “
“ will disappear confirming the
time has been set.
NOTE: The clock has a 24-hour display.
Changing the time of day
1. Switch the appliance “Off” by pressing “On / Off”.
2. Press “Timer” button repeatedly until the “Set
clock” symbol “
” appears flashing with the “Timer
arrow” symbol “ “ on the display.
3. To set the time of day, press “–” or “+” symbols
while the “Set clock” symbol “
” is flashing.
4. After 5 seconds from the last change, the “Set
clock” symbol “
” and “Timer arrow” symbol “ “
will disappear, confirming the time has been set.
Setting the oven function
1. Switch the appliance “On” by pressing “On / Off”.
The oven light will turn on.
2. Press “Function” button repeatedly until the desired
oven function appears. The suggested cooking
temperature for that function will appear in the
display which can be changed as described below.
After 5 seconds from the last change, the oven will
begin to heat.
NOTE: If the oven temperature is less than the set
temperature, the oven temperature and a rising
thermometer icon is displayed. When the oven
temperature reaches the set temperature, 4 beeps
sound and the set temperature and full thermometer
icon are displayed. If the set temperature is less than
the oven temperature, the set temperature and a full
thermometer icon is displayed.
USING YOUR OVEN