User Manual

22 USING YOUR OVEN
temperature selector will come on. When the temperature
is reached the heating source switches itself off and the
indicator light goes out. When the oven temperature falls
below the desired setting, the heating source switches on
and the indicator light comes on again.
Once the food is cooked, turn the temperature selector
off in an anti-clockwise direction. Do not force it right
round in a clockwise direction as this will result in damage
to the thermostat. Turn the multifunction selector off.
Preheating your oven with “Rapid Heat”
To preheat your oven select the “Rapid Heat” function.
This function allows your oven to reach the preset
temperature quicker than any other cooking function.
1. Turn the function selector to “Rapid Heat”.
2. Set the desired preheat temperature, by rotating your
oven temperature selector. When the indicator light
above the temperature selector goes out, the oven
has reached the desired temperature. Select the oven
function you require for cooking or baking and place
the food in the oven.
On completion of cooking
• The heat source will turn off, the timer will beep and
the end time and/or cook time ‘indicators’ will flash.
• Even though the heating element turns off the oven
will still retain substantial heat. This will continue to
cook the food until it is removed or the oven cools
down. If you do not plan on being present when the
oven turns off, you should take this extra heating time
into account.
• Turn the function and temperature controls to the
off position.
•
Press any button to stop the timer beeping.
Cooking with your timer WFE904SC
WARNING
CAUTION
Set the timer clockwise. Do not force anticlockwise or
damage to the timer will result.
120 minute “Auto off” timer
The 120 minute timer features an automatic oven cut off
This means that a cooking period of up to 120 minutes
can be set. When the timer has counted back to “Auto
off”, a bell will sound and the oven will automatically
switch off.
Once automatic baking is complete, return to manual
operation by setting the timer to the “OFF” mark.
Operating the touch control clock models
WFE914SC and WVE914SB
Function
Off
Oven/Grill
Off
Maxi
Grill
Fan
Grill
Grill
Defrost
Base
Heat
Bake/
Pizza
Fan
Bake
260
220
200
180
100
Keep
Warm
Timer
Cook Time
Mode
Clock
End Time
Rapid
Heat
High
Off
Low
High
Off
Low
High
Off
Low
High
Off
Low
High
Off
Low
Oven
indicator
H
L
O
I
O
F
F
O
F
F
H
L
O
I
O
F
F
H
L
O
I
O
F
F
H
L
O
I
O
F
F
H
L
O
I
General features
Your touch control clock has the following features:
•
Timer – allows you to set a countdown time that will
beep when the set time has elapsed.
• Cooking duration – You can set a cooking duration. A
timer will count down the preset cooking time, beep
when the time has elapsed and turn the
oven off.
• End cooking time – you can set a cooking finish time.
A timer will count down the preset cooking time,
beep when the finish time has been reached and turn
the oven off.
•
Delayed start cooking time – You can combine the
cooking time and stop cooking time to switch the
oven on and off at a specific time during the day.
NOTE: Your touch control clock only operates with
your main oven.
Setting the time of da
y
You must set the time of day before you can operate your
appliance. When power is supplied to your oven “12.00“
will be displayed and the “clock” indicator I will flash.
1.
To set the time of day in hours and minutes, press
or
. 5 seconds after the last change, the “clock” indicator
I will disappear, confirming the time has
been set.
NO
TE: The clock has a 24-hour display.
Change the time of day (Daylight saving)
1. Press “mode” until the “clock” indicator I
begins flashing.
2.
Press
or to change the time. 5 seconds after
the last change, the “clock” indicator I will disappear,
confirming the time has been set.
Setting the timer
1. Press “mode“ until the “timer” indicator I
begins flashing.
2. Set the countdown time you want by using and .
5 seconds after the last change the “timer” indicator I
will stop flashing, confirming the timer has been set.
3. To stop the beeper, press , or “mode”.
Setting the cooking duration
1. Check the clock displays the correct time of day.
2. Select the desired oven function and temperature.
The oven indicator light will glow and the heating
sour
ce will come on.
3. Press “mode“ until the “cook time” indicator I
begins flashing.
USING YOUR OVEN