INSTRUCTIONS HANDLE INSTALLATION WRB5004/ WFB4204
GENERAL WARNINGS Please read the user manual carefully and store in a handy place for later reference. Pass the user manual on to possible new owners of the appliance. LOCATE HANDLE BAR AND HANDLE KIT • Read the following carefully to avoid damage or injury. The bar handle is securely packed in the rear left hand EPS corner post packing. NOTE: You must read these warnings carefully before installing or using the accessory. If you need assistance, contact your Customer Care Department.
KIT CONTENTS Read and follow instructions carefully when installing the handles on this appliance, you may not be eligible to make a claim under warranty for damage caused by incorrect installation techniques. Please refer to warranty card in the product user manual for further warranty information.
INSTALLATION NOTE: To change your appliance door opening from left hand to right hand or vica versa you will need to purchase a door reversal kit part number A05807201. Please contact 131350 or http://shop.electrolux.com.au Bar handle assembly • Using a suitable work space, place handle bar with screw holes facing up on a soft surface to prevent damage to handle. • Locate and position the three handle brackets on handle bar so that the pins locate in holes and screw holes align.
• Identify the correct side of the door to fit handle (opposite hinge). • Align screw holes on handle with holes in door. • Using Allen key attach handle assembly to the door with M4 screws provided. 1. Fit one screw finger tight to middle bracket ‘B’. 2. Fit one screw finger tight to top and bottom brackets ‘A’ and ‘C’. 3. Ensure handle is located correctly onto the door. 4. Fit remaining 3 screws and tighten. • Ensure all screws are tightened. • Fit Covers by clipping onto brackets.
INSTALLATION (CONTINUED) • Select plugs of correct colour to match your refrigerator. • Push plugs into screw holes on hinge side of door. Your handle installation is now complete.
NOTES 7
For more information on all Westinghouse appliances, or for dimension and installation information, call into your retailer, phone or email our customer care team or visit our website: AUSTRALIA phone: 1300 363 640 fax: 1800 350 067 email: customercare@electrolux.com.au web: westinghouse.com.au NEW ZEALAND phone: 0800 436 245 fax: 0800 225 088 email: customercare@electrolux.co.nz web: westinghouse.co.
