Use and Care Manual

Step 1: Using the wall mount bracket as a template mark the four screw holes where you plan to install the radiator.
Step 2: Place the radiator with the mounting bracket on the four marks and tighten four screws (not included).
Step 3
Once installed, you can adjust the heater to the desired angle.
3. OPERATION
MAKE SURE THE HEATER IS NOT FUNCTIONING BEFORE YOU HANG IT ON A GAZEBO, OR UNDERNEATH A BALCONY
OR A ROOF.
NOTE: Wait until the heater’s heating element has cooled down before moving it.
REMEMBER: Portable electric heaters are designed for spot heating or as a supplementary heat source. They are not
intended to be the main source of heat during cold months.
Caution:
You must always make sure that there is at least 9.8” (25 cm) of empty space above the heater, 5.9” (15 cm)
from the side and 5’ (1.8 m) below the heater.
Control Panel
Activation button