User Manual

6 www.electrolux.com
.3 ESU
3.1 The Control Panel
1
2
3
This button allows you to start or
pause the dryer to check the
contents or perhaps add more
clothes.
NOTES : The dryer will not start
unless the door is closed.
(If door is not closed you
will hear 6 beeps followed by
DRY LED blinking 4 times.)
If selector knob is turned while
dryer is running or paused
mid cycle 3 beeps is heard to
indicate operation is not allowed.
Cycle will not continue if selector
knob is not returned to original
selected program.
3
START/PAUSE BUTTON
2
INDICATORS
Turn the Program Selector knob to
choose a drying program.
The table “Program Guide”
shown on page 7 will help
you in selecting the right program.
NOTES : The Program Selector knob
is not a timer. Once you select a
drying program, the Program Selector
knob will stay at that position for
the whole drying cycle.
1
PROGRAM SELECTOR KNOB
STATES STATUS INDICATOR
Initial Power on.
• After appliance is powered on.
•
Allows user to select a drying
program
sknilb DEL yrD •
ffO DEL dnE •
Machine Switched Off • All LED Off
Drying Phase
• Drying cycle starts.
•
•
Buzzer will sound after main
drying and cooling phases
ends, at the start of
anticrease.
Anticrease in progress
Drying & Cooling
nO DEL yrD •
ffO DEL dnE •
Anticrease
ffO DEL yrD •
• End LED blinks
Paused
• Drying cycle paused
• Cannot change drying program
• Dry LED blinks
End LED Off
End State
•
•
Drying cycle and
See description on page 10
Anticrease completed
• Dry LED Off
• End LED Off
Alarm/ Error
• Dry LED blinks
• End LED blinks
ANTI CREASE CYCLE IN PROGRESS
ffO DEL yrD •
• End LED blinks
NOTE:
Anti crease can be stopped at any time by
opening the door and removing the clothes.
The anti crease cycle is designed to help prevent creases
forming in the clothes after normal drying cycle has ended.
The anti crease progress indicator will start blinking during
the time anti crease phase is running. The drum will rotate
for 5 seconds every minute and will go for 1 hour
Anti crease phase cannot be disabled.