user manual Dishwasher WDF901
westinghouse Electrolux. Thinking of you. Westinghouse. We are part of the Electrolux family. Share more of our thinking at www.electrolux.
westinghouse 3 Installation • Make sure that the appliance is not damaged because of transport. Do not connect a damaged appliance. If necessary, contact the supplier. • Remove all packaging before first use. • A qualified and competent person must do the electrical installation. • A qualified and competent person must do the plumbing installation. • Do not change the specifications or modify this product. Risk of injury and damage to the appliance.
westinghouse Product description 9 1 Upper basket 2 Air vent and water hardness dial (the dial is only functional for dishwashers with a water softener) 3 Detergent dispenser 4 Rinse aid dispenser 5 6 7 8 9 Rating plate Filters Lower spray arm Upper spray arm Worktop
westinghouse 5 Control panel 1 2 3 4 5 6 7 8 On/off button (POWER) Program selection button (PROGRAM) Button lock button (Button LOCK) Start button (START) Start indicator light Indicator lights Button lock indicator light Program indicator lights Indicator lights WASHING The indicator light comes on when the washing program operates and goes off when the washing program is completed. READY The indicator light comes on when the washing program is completed.
westinghouse Use of the appliance Refer to specified instructions for each step of the procedure. 1. Fill the rinse aid dispenser with rinse aid. 2. Load cutlery and dishes into the dishwasher. 3. Set the correct washing program for the type of load and soil. 4. Fill the detergent dispenser with the correct quantity of detergent. 5. Start the washing program. Use of rinse aid Caution! Only use rinse aid specified for dishwashers. Do not fill the rinse aid dispenser with other products (e.g.
westinghouse 7 Turn the rinse aid dial to increase or decrease the dosage. – Increase the dosage if there are water droplets or limescale on the dishes. – Decrease the dosage if there are streaks, whitish stains or bluish layers on the dishes. Wash hands to remove any residue of rinse aid from skin. Loading cutlery and dishes Helpful hints and tips Caution! Only use the appliance for household utensils that are suitable for dishwashers.
westinghouse If the points of the knives or other thin items come out from the bottom of the basket, they can prevent the rotation of the lower spray arm. Put knives and other thin items with the handles down. Mix spoons with other cutlery to prevent them nesting together. Upper basket The upper basket is for plates (maximum 24 cm in diameter), saucers, salad bowls, cups, glasses, pots and lids. Arrange the items to let water touch all surfaces.
westinghouse 9 Do not use more than the correct quantity of detergent to decrease pollution. Follow these steps to fill the detergent dispenser: 1. Open the lid of the detergent dispenser. 5. Close the lid of the detergent dispenser. Press the lid until it locks into position. 2. Fill the detergent dispenser (A) with detergent. The marking shows the dosage: 20 = approximately 20 g of detergent 30 = approximately 30 g of detergent. A B 3.
westinghouse Select and start a washing program 1. Close the appliance door. 2. Press the on/off button. 3. Make sure that the appliance is in setting mode. 4. To select a washing program, press the program selection button until the indicator light of the program you want to set comes on. All other program indicator lights go off. Refer to the 'Washing programs' chart for program details. – The start indicator light flashes. 5. Press the start button. The washing program starts automatically.
westinghouse 11 Washing programs Washing programs Program Degree of soil Type of load Program description RINSE Any partial load (to be completed later in the day). 1 cold rinse (to prevent food scraps to bond). Detergent is not necessary with this program.
westinghouse Care and cleaning Warning! Switch the appliance off before you clean it. Cleaning the filters Caution! Do not use the appliance without the filters. Make sure that the installation of the filters is correct. Incorrect installation will cause unsatisfactory washing results and damage to the appliance. 5. Hold the coarse filter (A) by the handle with the hole. 6. Remove the coarse filter from the microfilter. 7. Remove the flat filter (C) from the bottom of the appliance.
westinghouse 13 1. Disconnect the mains plug from the mains socket. 2. Close the water tap. 3. Keep the door open to prevent unpleasant smells. 4. Keep the inner side of the appliance clean. Frost precautions Caution! Do not install the appliance where the temperature is below 0 °C. The manufacturer is not responsible for damage because of frost. If not possible, empty the appliance and close the door. Disconnect the water inlet hose and remove water from the water inlet hose.
westinghouse What to do if… The appliance does not start or stops during operation. If there is a fault, first try to find a solution to the problem yourself. Refer to 'What to do Fault code and malfunction if...'. If you cannot find a solution to the problem yourself, contact your dealer or the Customer Care Centre.
westinghouse 15 Technical data Dimensions Width cm 60 Height cm 85 Depth cm 63,5 Electrical connection - Voltage Overall power - Fuse Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher door. Water supply pressure Minimum 50 kPa (7 psi) Maximum 800 kPa (116 psi) Capacity Place settings 12 Installation Fitting under a counter Warning! Make sure that mains plug is disconnected from the mains socket during installation.
westinghouse Water connection Water inlet hose Connect the appliance to a cold water supply. Connect the inlet hose to a water tap with an external BSP thread spout of 3/4”. Inlet water supply • Cold water pressure: 800 kPa max - 50 kPa min. • Water flow rate 10 L / minute min. • If cold water pressure is in excess of 800 kPa, a pressure reducing valve should be used. Check for leaks. Caution! Always use new hoses when you connect the appliance to the water mains. Old hoses must not be used.
westinghouse 17 type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also to be found on the rating plate. Always plug the mains plug onto a correctly installed approved socket. Do not use multi-ways plugs, connectors and extension cables. This can constitute a fire hazard through overheating. If necessary, have the domestic wiring system socket replaced. If the mains cable has to be replaced, contact your local Customer Care centre.
westinghouse Warranty FOR SALES IN AUSTRALIA AND NEW ZEALAND This document sets out the terms and conditions of product warranties for Electrolux branded appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should you require service for your Electrolux appliance. General Terms and Conditions 1.
westinghouse 19 – The Appliance was serviced or repaired by anyone other than Electrolux or its Authorised Service Centres. 9. This warranty, the contract to which it relates and the relationship between you and Electrolux are governed by the law applicable in the Australian State where the Appliance was purchased or the law applicable in New Zealand if the Appliance was purchased in New Zealand.
www.electrolux.com www.westinghouse.com.
