User manual

CONTROL PANEL
1 On/off button (POWER)
2 Program selection button (PROGRAM)
3 Button lock button (Button LOCK)
4 Start button (START)
5 Start indicator light
6 Indicator lights
7
Button lock indicator light
8 Program indicator lights
Indicator lights
WASHING Comes on when the washing program operates and goes off
when the washing program is completed.
READY Comes on when the washing program is completed. It also has
the auxiliary functions of alarm if the appliance has a malfunction.
Button LOCK Comes on when the button lock function is active.
Button lock
The button lock function locks all buttons
on the control panel while the washing pro-
gram is in operation.
The Button Lock function can be set
only after a washing programme starts.
It is not possible to set this function
with the delay start.
Follow these steps to set the Button lock
function:
1. Switch on the appliance.
2. Set a washing program.
3. Press the Start button to start the wash-
ing program.
4. Press button lock button for approxi-
mately 5 seconds, or until the button
lock indicator light flashes.
5. Button lock indicator light flashes for ap-
proximately 15 seconds.
6. When the button lock function is active
the indicator light is on with a static light.
If you press a button while button lock func-
tion is on, an audible signal indicates that
buttons are locked.
At the end of a washing program the button
lock function is deactivated by opening and
closing the door or switching off the appli-
ance.
Important! It is not possible to deactivate
the button lock function while a washing
program is in progress. To do this you must
cancel the set program. Refer to 'Select
and start a washing program'.
Setting mode
The appliance is in setting mode when all
the program indicator lights are on.
The appliance must be in setting mode to
set a washing program.
westinghouse 5