Instructions / Assembly

29
WHL-012 REV. 9.4.14
Figure 17 – Gas Line with Shut-Off Valve Detail
Figure 18 – Natural Gas Piping Installation – NOTE: Capacity to be Not Less than Total Capacity of Connected Appliances
Figure 19 – LP Gas Piping Installation – NOTE: Capacity to be Not Less than Total Capacity of Connected Appliances
PART 8 – WATER PIPING
A. GENERAL PLUMBING CONNECTION GUIDELINES
 Pipe material must be suitable to meet local codes and industry standards.
 The pipe must be cleaned and without blemish before any connections are made.
 Do not apply a torch within 12” of the appliance. Doing so could damage the appliance. Such damages ARE NOT covered by
product warranty.
 The size of the hot water pipe should be ¾” diameter and the central heating water pipe should be 1” in diameter.