Instruction manual
Table Of Contents
- Preface
- Safety Precautions
- Table of Contents
- Warnings, Cautions and Conformity
- Chapter 1 Drive Model Identification
- Chapter 2 Mounting and Wiring the Inverter
- Chapter 3 Operation using the Keypad
- Chapter 4 Function Codes / Parameters
- Chapter 5 Check Motor Rotation and Direction
- Chapter 6 Speed Reference Command Configuration
- Chapter 7 Operation Method Configuration (Run / Stop)
- Chapter 8 Motor and Application Specific Settings
- Chapter 9 Using PID Control for Constant Flow / Pressure Applications
- Chapter 10 Troubleshooting
- 10.1 Protective Functions
- 10.2 Before Proceeding with Troubleshooting
- 10.3 If Neither an Alarm Code Nor "Light Alarm" Indication Appears on the LED Monitor
- 10.4 If an Alarm Code Appears on the LED
- 10.5 If the “Light Alarm” Indication Appears on the LED Monitor
- 10.6 If an Abnormal Pattern Appears on the LED Monitor except Alarm Codes and "Light Alarm" Indication
- 10.7 If the Inverter is Running on Single-Phase Power
- Chapter 11 Specifications
7-5
Set value
Frequency command
Run command (Run/Stop)
0
F01 / C30
F02
1
Enabled / RS485 (Port 1)
F02
2
F01 / C30
Enabled / RS485 (Port 1)
3
Enabled / RS485 (Port 1)
Enabled / RS485 (Port 1)
4
Enabled / RS485 (Port 2)
F02
5
Enabled / RS485 (Port 2)
Enabled / RS485 (Port 1)
6
F01 / C30
Enabled / RS485 (Port 2)
7
Enabled / RS485 (Port 1)
Enabled / RS485 (Port 2)
8
Enabled / RS485 (Port 2)
Enabled / RS485 (Port 2)
Command Register
EQ7 Drive Command Register: 1798 (Decimal)
Bit 0: Run Forward
Bit 1: Run Reverse
Bit 2 ~ Bit 15: Refer to the EQ7 Drive AC Drive Instruction Manual
Examples:
Run Forward Command (EQ7 Drive Address: 01)
Command String (hexadecimal): 01 06 07 06 00 01 A9 7F
Run Reverse Command (EQ7 Drive Address: 01)
Command String (hexadecimal): 01 06 07 06 00 02 E9 7E
Stop Command (EQ7 Drive Address: 01)
Command String (hexadecimal): 01 06 07 06 00 00 68 BF
Note: The last 2 bytes of the command strings consist of a CRC16 checksum, please refer to the Refer to the EQ7
Communications Manual for additional information.
H30
Communications Link Function