User manual

32 building-in
Fitting the steam protection
Fit the steam protection onto the front
part of the worktop, using the screws
provided.
Securing the dishwasher
1. Locate the angular brackets in the
slots on the top of the dishwasher.
2. Adjust the height of the dishwasher.
3. Secure the dishwasher in position
(upwards or sideways) by using the
screws supplied.
Make sure the screws are
tightened.
The dishwasher must be
secured to the underside of the
worktop or to adjacent units by
using the brackets supplied.
Neglect to do this can cause injury
or damage.
Under no circumstances may holes
be drilled through the sides of the
dishwasher since this could
damage the hydraulic components.
600
mm
Do not secure the brackets
upwards if the top of the
dishwasher is not within 2mm of
the underside of the worktop.
117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 32