User manual

Fault code Malfunction Possible cause Solution
The programdoes
not start
● The dishwasher
door has not been
properly closed
● The main plug is
not plugged in
● Delay start has
been set
● The fuse has
blown out in the
household fuse
box
● Close the door
● Replace the fuse
● Insert the main
plug
● If dishes are to be
washed
immediately,
cancel the delay
start
Once these checks have been carried
out, switch on the appliance. The
program will continue from the point at
which it was interrupted.
If the malfunction or fault code
reappears or for other fault codes not
described in the above chart, please
contact your Customer Care Centre,
quoting the model (Mod.), product
number (PNC) and serial number
(S.N.).
This information can be found on the
rating plate located on the side of the
dishwasher door.
So that you always have these
numbers at hand, we recommend you
note them here:
Mod. :. . . . . . . . . . . . . . . . . . . . . . . . .
PNC :. . . . . . . . . . . . . . . . . . . . . . . . .
S.N. : . . . . . . . . . . . . . . . . . . . . . . . . .
24 something not working
117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 24