User manual

Something not working
The dishwasher will not start or stops during operation.
Certain problems are due to lack of maintenance or oversights, which can be
solved with the help of the indications described in the chart, without calling out
a service technician.
Switch off the dishwasher and carry out the following suggested corrective
actions.
Fault code Malfunction Possible cause Solution
● continuous flashing
of the light of the
running program
●
appears in
the digital display
The dishwasher
does not fill with
water
● The water tap is
blocked or restricted
with limescale
● The water inlet
hose has not been
correctly laid or it
is bent or
squashed
● The filter (where
present) in the
threaded hose
fitting at the water
inlet valve is
blocked
● The water tap is
turned off
● Check the water
inlet hose
connection
● Turn the water tap
on
● Clean the filter in
the threaded hose
● Clean the water
tap
● continuous flashing
of the light of the
running program
● appears in
the digital display
The dishwasher will
not drain
● The sink spigot is
blocked
● The water drain
hose has not been
correctly laid or it
is bent or
squashed
● Clean out the sink
spigot
● Check the water
drain hose
connection
● continuous flashing
of the light of the
running program
●
appears in
the digital display
Anti-flood device is
activated
● Close the water
tap and contact
your local
Customer Care
Centre.
23 care and cleaning
care and cleaning 23
117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 23