User manual

Cancel a delay start or a washing
program in progress
● Simultaneously press and hold the
two program buttons positioned
over the word Cancel, until only
the POWER light is on. The
washing program has been
cancelled.
If a new washing program is to be
selected, check that there is
detergent in the detergent
dispenser.
End of the washing program
● The dishwasher will automatically
stop.
● The light of the program just ended
will remain on.
● Zero appears in the digital display.
1. Switch off the dishwasher by
pressing the POWER button.
2. Open the dishwasher’s door, leave
it ajar and wait a few minutes
before removing the dishes; in this
way they will be cooler and the
drying will be improved.
Unloading the dishwasher
● Hot dishes are sensitive to knocks.
Dishes should therefore be allowed
to cool down before removing from
the appliance.
● Empty the lower basket first and
then the upper one; this will avoid
water dripping from the upper
basket onto the dishes in the lower
one.
● Water may appear on the sides
and the door of the dishwasher as
the stainless steel will eventually
become cooler than the dishes.
daily use 19
117975890 06052008.qxp 5/6/2008 12:22 PM Pagina 19