User manual

Control panel
POWER button
PROGRAM selection button
Button LOCK
START button
START light
Indicator lights
Button LOCK light
Program lights
1
2
3
4
5
To activate the Button LOCK function,
press the button LOCK for 5 seconds,
the button lock light blinks for 15
seconds, then when it is permanently
on, it indicates it is active. The button
lock key stops anyone from changing
the selected program.
If any button is pressed, an audible
signal indicates that the key lock
funtion is active.
To cancel the selected program and
select a new one, reset the
dishwasher by:
- pressing the button lock key for 5
seconds (the keylock light blinks for
15 seconds)
- press and hold simultaneously
PROGRAM and button LOCK
buttons (Cancel) for approximaly 3
seconds or until all the programme
lights will illuminate (setting mode),
then the program has been
cancelled and the key lock
deactivated and a new program can
be selected.
The button LOCK option is
automatically deactivated at the end
of the selected program by switching
OFF the dishwasher or opening and
closing the door.
6
7
8
Button Lock option
Close the door.
Press the POWER button.
Press the program Button to select a
program.
Press the START button to start the
cycle execution.
control panel 7
117975880_06052008.qxp 5/6/2008 12:15 PM Pagina 7