User manual

Interrupt or cancel a washing
program in progress ONLY if it’s
absolutely necessary.
Attention! Hot steam may escape
when the door is opened. Open the
door carefully.
Interrupt a washing program in
progress:
● Open the dishwasher door; the
program will stop. Close the door;
the program will start from the
point at which it was interrupted.
● Press the POWER button, all lights
will turn off. Press the POWER
button again; the program will start
from the point at which it was
interrupted.
Cancel a washing program in
progress
● Press and hold simultaneously
PROGRAM and button LOCK
buttons (Cancel) until the program
light indicator switches off, then the
program has been cancelled and
the key lock deactivated and a new
program can be selected.
If a new washing program is to be
selected, check that there is
detergent in the detergent
dispenser.
End of the washing program
● The dishwasher will automatically
stop.
● The light of the program just ended
will remain on.
● The READY light illuminates.
1. Switch off the dishwasher by
pressing the POWER button.
2. Open the dishwasher door, leave it
ajar and wait a few minutes before
removing the dishes; in this way
they will be cooler and the drying
will be improved.
Unloading the dishwasher
● Hot dishes are sensitive to knocks.
Dishes should therefore be allowed
to cool down before removing from
the appliance.
● Empty the lower basket first and
then the upper one; this will avoid
water dripping from the upper
basket onto the dishes in the lower
one.
● Water may appear on the sides
and the door of the dishwasher as
the stainless steel will eventually
become cooler than the dishes.
18 daily use
117975880_06052008.qxp 5/6/2008 12:15 PM Pagina 18