User Manual

Page 64
 If this option is not used disconnect the “pigtail”
 If used you may provide 6 to 12vdc (red + black -)
10.2 Normally Open (N.O.) Relay Contacts
 Blue and white wires (N.O. = normally open meaning at rest this connect is open)
 These relay contacts allow you at use the connection as a momentary switch
 Accessing the lock will close these contacts for the duration of the open cycle
 In the timed Tums mode this connection will be maintained in the closed state
The uses of this feature:
Can be used to operate a light or a relay to a light so that the user would not be entering
a darken space (the light/relay would only remain on during the open cycle of the lock)
Can be used to activate a separate locking device (i.e. electric deadbolt or electric
strike)
The red and black wires have a
connector that can be detached and
wired to a 12V power supply.
Disconnect the wires and hard wire to
the 12V source. Once hard wired
reconnect to the lock.
Normally open wires are the blue and
white wires. These can be connected
to a relay device.